Difficulty

Moderate

Steps

6

Time Required

                          5 - 10 minutes

Sections

1

  • LCD
  • 6 steps

Flags

0

  • BackHP Envy 5660

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD
  • Lift the scanner to open up the printer cartridge access area.

Lift the scanner to open up the printer cartridge access area.

1024

Step 2

  • Remove the two 12 mm screws with a T10 bit.

Remove the two 12 mm screws with a T10 bit.

Step 3

  • Use a metal spudger to pry open the front panel.
  • Work your way all the way around the front panel doing the same.
  • Gently flip the cover over, exposing the motherboard.
  • There will be loud popping sounds when the cover is being separated from the rest of the printer.

Use a metal spudger to pry open the front panel.

Work your way all the way around the front panel doing the same.

Gently flip the cover over, exposing the motherboard.

There will be loud popping sounds when the cover is being separated from the rest of the printer.

Step 4

  • Remove the four 4.5 mm screws from the motherboard with a T6 bit.
  • Gently remove the motherboard from the top of the LCD, but make sure the ribbon cables are still attached.
  • Beware damaging the white ribbon cable.

Remove the four 4.5 mm screws from the motherboard with a T6 bit.

Gently remove the motherboard from the top of the LCD, but make sure the ribbon cables are still attached.

Beware damaging the white ribbon cable.

Step 5

  • Remove the four 5 mm screws with a T6 bit, allowing you to separate the LCD from the cover,

Remove the four 5 mm screws with a T6 bit, allowing you to separate the LCD from the cover,

Step 6

  • Place the metal spudger underneath the LCD and gently lift up to remove the LCD.

Place the metal spudger underneath the LCD and gently lift up to remove the LCD.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Ryan Steakley

Member since: 01/23/2018

781 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Cal Poly, Team S1-G6, Livingston Winter 2018                        

                                                  Member of Cal Poly, Team S1-G6, Livingston Winter 2018 



                    CPSU-LIVINGSTON-W18S1G6                     


                                            4 Members                     


                                            5 Guides authored

pateckelberry - Oct 4, 2018

Reply

Great description but there is a part needed - the LCD. Is that part available? How do I get it?

Thanks,

PJE

Tessa Robles - Jun 22, 2022

Reply

Ditto, I’m in the same position, did you ever find the part/LCD replacement screen?