Difficulty
Easy
Steps
13
Time Required
5 minutes
Sections
1
- Paper Tray
- 13 steps
Flags
0
BackHP ENVY 5530
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Paper Tray
- Grab both sides of the printer and flip it away from you so the bottom is facing up.
Grab both sides of the printer and flip it away from you so the bottom is facing up.
1024
Step 2
- Locate the 13mm TR10 Torx screws on the left side of the paper tray.
Locate the 13mm TR10 Torx screws on the left side of the paper tray.
Step 3
- Unscrew and remove the 13mm TR10 Torx Security screw, starting with the farthest screw on the left
Unscrew and remove the 13mm TR10 Torx Security screw, starting with the farthest screw on the left
Step 4
- Locate and remove middle 13mm TR10 Torx Security screw using a Torx screwdriver.
Locate and remove middle 13mm TR10 Torx Security screw using a Torx screwdriver.
Step 5
- Locate and remove the last 13mm TR10 Torx Security screw.
Locate and remove the last 13mm TR10 Torx Security screw.
Step 6
- Locate the side tab and lift up to remove.
Locate the side tab and lift up to remove.
Step 7
- Locate the three 13mm TR10 Torx Security screws on the right side panel.
Locate the three 13mm TR10 Torx Security screws on the right side panel.
Step 8
- Locate and remove the farthest 13mm TR10 Torx Security screw.
Locate and remove the farthest 13mm TR10 Torx Security screw.
Step 9
- Locate middle 13mm TR10 Torx Security screw and remove it.
Locate middle 13mm TR10 Torx Security screw and remove it.
Step 10
- Locate last 13mm TR10 Torx Security screw and remove it.
Locate last 13mm TR10 Torx Security screw and remove it.
Step 11
- Locate tab on the right side panel and lift to remove it.
Locate tab on the right side panel and lift to remove it.
Step 12
- The back should look like this.
The back should look like this.
Step 13
- Remove paper tray by pulling it out and away from the printer.
- Be cautious of jumping springs once pulling out the paper tray.
Remove paper tray by pulling it out and away from the printer.
Be cautious of jumping springs once pulling out the paper tray.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Elizabeth Surface
Member since: 08/26/2015
1,447 Reputation
9 Guides authored
Badges:
16
+13 more badges
Team
USF Tampa, Team 4-6, Meier Fall 2015
Member of USF Tampa, Team 4-6, Meier Fall 2015
USFT-MEIER-F15S4G6
4 Members
14 Guides authored
