Hp Envy 4 1105Dx Battery Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          10 minutes            

Sections

1

• Battery
• 8 steps

Flags

0

• BackHP Envy 4-1105dx

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Power off the device before beginning disassembly. Disconnect all external devices.
• Flip the device on its back.

Power off the device before beginning disassembly. Disconnect all external devices.

Flip the device on its back.

1024

Step 2

• Unscrew and remove the one 7.5 mm Phillips-head screw using Phillips #1 screwdriver.

Unscrew and remove the one 7.5 mm Phillips-head screw using Phillips #1 screwdriver.

Step 3

• Unscrew twelve 6.0 mm Phillips-head screws using Phillips #1 screwdriver.

Unscrew twelve 6.0 mm Phillips-head screws using Phillips #1 screwdriver.

Step 4

• Use the plastic opening tool (which is short and has a thin end for prying open device parts) to pry open the back case of the device.

Use the plastic opening tool (which is short and has a thin end for prying open device parts) to pry open the back case of the device.

Step 5

• Once the device is open, move the ribbon cable to the side.

Once the device is open, move the ribbon cable to the side.

Step 6

• Use the flat end of a plastic spudger to disconnect the battery cable from its socket in the motherboard.

Use the flat end of a plastic spudger to disconnect the battery cable from its socket in the motherboard.

Step 7

• Unscrew and remove the three 4.0 mm Phillips-head screws that hold the battery in place, using a Phillips #1 screwdriver.

Unscrew and remove the three 4.0 mm Phillips-head screws that hold the battery in place, using a Phillips #1 screwdriver.

Step 8

• Lift the battery up and remove.
• Removing the battery can dislodge the touchpad bracket. Place the battery carefully over the alignment pins.

Lift the battery up and remove.

Removing the battery can dislodge the touchpad bracket. Place the battery carefully over the alignment pins.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Parvathy Nambidi                     

Member since: 05/17/2017

298 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Portland State University, Team S1-G4, Read Fall 2017                        

                                                  Member of Portland State University, Team S1-G4, Read Fall 2017 



                    PSUN-READ-F17S1G4                     


                                            2 Members                     


                                            3 Guides authored                     

Tony Chan - Mar 23, 2022

Reply

Worked very well, many thanks