Hp Envy 4 1030Us Cpu Fan Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          3 - 5 minutes            

Sections

2

• Bottom Cover
• 2 steps
• CPU Fan
• 2 steps

Flags

0

• BackHP Envy 4-1030us

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

When working with electronic components, we recommend wearing an electrostatic wristband, it is possible for the static electricity present on you to discharge onto one of the components, wearing one of these wristbands and clipping it to a piece of metal will prevent this from happening.

What you need

Step 1

              Bottom Cover               

• Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.

Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.

1024

Step 2

• Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.
• Lift the bottom cover off of the system.

Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.

Lift the bottom cover off of the system.

Step 3

              CPU Fan               

• Using the Phillips #0 screwdriver unscrew the two 4.2mm screws fastening the CPU fan to the heatsink and motherboard.

Using the Phillips #0 screwdriver unscrew the two 4.2mm screws fastening the CPU fan to the heatsink and motherboard.

Step 4

• Carefully lift up the CPU fan to gain better access to the fan cable.
• Disconnect the fan cable by pulling the cable away from the connector and remove the fan from the device.

Carefully lift up the CPU fan to gain better access to the fan cable.

Disconnect the fan cable by pulling the cable away from the connector and remove the fan from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Christopher Luna                     

Member since: 10/08/2017

694 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S1-G1, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S1-G1, Thompson Fall 2017 



                    USFT-THOMPSON-F17S1G1                     


                                            4 Members                     


                                            6 Guides authored