Hp Envy 4 1030Us Battery Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          10 minutes            

Sections

2

• Bottom Cover
• 2 steps
• Battery
• 3 steps

Flags

0

• BackHP Envy 4-1030us

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

When working with electronic components, we recommend wearing an electrostatic wristband, it is possible for the static electricity present on you to discharge onto one of the components, wearing one of these wristbands and clipping it to a piece of metal will prevent this from happening.

What you need

Step 1

              Bottom Cover               

• Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.

Using the Philips #0 screwdriver, remove the 12 7.5mm screws from the bottom cover.

1024

Step 2

• Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.
• Lift the bottom cover off of the system.

Using the plastic opening tool, carefully work the tool between the bottom cover and bottom chassis to loosen the connection.

Lift the bottom cover off of the system.

Step 3

              Battery               

• Disconnect the battery cable from the motherboard. This will be found above the battery and below the CPU fan.
• To take the cable out, carefully grab the head of the cable and slowly pull it outwards.

Disconnect the battery cable from the motherboard. This will be found above the battery and below the CPU fan.

To take the cable out, carefully grab the head of the cable and slowly pull it outwards.

Step 4

• Use the Philips #0 screwdriver to remove the three 4.2mm screws that are securing the battery to the board.

Use the Philips #0 screwdriver to remove the three 4.2mm screws that are securing the battery to the board.

Step 5

• Then slowly remove the battery from the right side of the battery and then raise it up.
• Make sure to move the USB Audio board cable away from the battery incase it gets caught.

Then slowly remove the battery from the right side of the battery and then raise it up.

Make sure to move the USB Audio board cable away from the battery incase it gets caught.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Christopher Luna                     

Member since: 10/08/2017

694 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S1-G1, Thompson Fall 2017                        

                                                  Member of USF Tampa, Team S1-G1, Thompson Fall 2017 



                    USFT-THOMPSON-F17S1G1                     


                                            4 Members                     


                                            6 Guides authored