Difficulty
Easy
Steps
6
Time Required
                          5 - 10 minutes            
Sections
2
- Back Panel
- 3 steps
- RAM
- 3 steps
Flags
1
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
- BackHP Envy 23-d060qd TouchSmart 
- Full Screen 
- Options 
- History 
- Save to Favorites 
- Download PDF 
- Edit 
- Translate 
- Get Shareable Link 
- Embed This Guide 
- Notify Me of Changes 
- Stop Notifications 
Introduction
What you need
Step 1
              Back Panel               
- Use your hands to unclip the plastic snaps on the back panel of the device.
Use your hands to unclip the plastic snaps on the back panel of the device.
1024
Step 2
- Remove the three 11.5mm PH2 screws from the back panel.
- The screws will not fall out of the back panel, but they will unscrew to release the back panel.
Remove the three 11.5mm PH2 screws from the back panel.
The screws will not fall out of the back panel, but they will unscrew to release the back panel.
Step 3
- Now, take the back panel off by pulling at it gently with your hands.
Now, take the back panel off by pulling at it gently with your hands.
Step 4
              RAM               
- Pop off the easy-access cover to get into the RAM module.
Pop off the easy-access cover to get into the RAM module.
Step 5
- Push out the four clips that hold the RAM modules to the side.
- The RAM modules will pop open after you unclick all four clips.
Push out the four clips that hold the RAM modules to the side.
The RAM modules will pop open after you unclick all four clips.
Step 6
- Pull out each module.
- Replace RAM with desired replacement.
- When substituting your RAM in, make sure to line up the edges with the lines on the RAM compartment so that the RAM is able to fit inside properly.
Pull out each module.
Replace RAM with desired replacement.
When substituting your RAM in, make sure to line up the edges with the lines on the RAM compartment so that the RAM is able to fit inside properly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
                                                                                      3 other people completed this guide.                                             
Author
                                      with 7 other contributors 
                    Zachary Dicks                     
Member since: 10/01/2015
1,069 Reputation
                                      7 Guides authored                  
                       Badges:
                       16
                                                        +13 more badges                           
Team
                       Cal Poly, Team 5-10, Maness Fall 2015                        
                                                  Member of Cal Poly, Team 5-10, Maness Fall 2015 
                    CPSU-MANESS-F15S5G10                     
                                            4 Members                     
                                            14 Guides authored