Difficulty

Moderate

Steps

7

Time Required

                          20 minutes

Sections

2

  • Back Cover
  • 5 steps
  • Battery
  • 2 steps

Flags

0

  • BackHP Envy 17m-ae111dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Back Cover
  • Power off your laptop before beginning disassembly.
  • Place the laptop on its back.

Power off your laptop before beginning disassembly.

Place the laptop on its back.

1024

Step 2

  • Remove the plastic covering to the Disk Reader.
  • Locate the small hole on the side of the disk reader. Insert the T5 Torx head screwdriver (or device of similar thickness) to release the covering for the disk reader.
  • If the button on the side is jammed, pry off the covering by using the iFixit Opening Tool.

Remove the plastic covering to the Disk Reader.

Locate the small hole on the side of the disk reader. Insert the T5 Torx head screwdriver (or device of similar thickness) to release the covering for the disk reader.

If the button on the side is jammed, pry off the covering by using the iFixit Opening Tool.

Step 3

  • Unscrew all visible screws.
  • Use the T5 Torx Screwdriver and remove the four visible 6.5mm screws on the bottom of the laptop.
  • One 2.5mm screw, is located where the disk reader was once located. Use a Phillips #00 screwdriver to remove the single screw that connects the bottom cover of the laptop to the bottom frame.

Unscrew all visible screws.

Use the T5 Torx Screwdriver and remove the four visible 6.5mm screws on the bottom of the laptop.

One 2.5mm screw, is located where the disk reader was once located. Use a Phillips #00 screwdriver to remove the single screw that connects the bottom cover of the laptop to the bottom frame.

Step 4

  • Pry the gripper completely off to expose the two screws.
  • Remove the 2.5mm screws under the gripper nearest to the hinge using the Phillips #00 screwdriver.

Pry the gripper completely off to expose the two screws.

Remove the 2.5mm screws under the gripper nearest to the hinge using the Phillips #00 screwdriver.

Step 5

  • Use the iFixit opening tool to pry off the back cover.
  • Ensure that you go all the way around the laptop with the tool to take it off.

Use the iFixit opening tool to pry off the back cover.

Ensure that you go all the way around the laptop with the tool to take it off.

Step 6

              Battery
  • Use a Phillips #00 screwdriver to remove all seven screws.

Use a Phillips #00 screwdriver to remove all seven screws.

Step 7

  • Unplug the battery from the connection port and remove the battery from the device.

Unplug the battery from the connection port and remove the battery from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 2 other contributors 


                    Austin Greene

Member since: 09/16/2019

420 Reputation

                                      2 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Embry-Riddle Aeronautical University, Team S23-G5, McClure Fall 2019                        

                                                  Member of Embry-Riddle Aeronautical University, Team S23-G5, McClure Fall 2019 



                    ERAU-MCCLURE-F19S23G5                     


                                            4 Members                     


                                            5 Guides authored