Hp Envy 17 3070Nr Battery Replacement Repair Guide

Difficulty

Easy

Steps

4

Time Required

Suggest a time??

Sections

2

• Back Cover
• 2 steps
• Battery
• 2 steps

Flags

1

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackHP Envy 17-3070nr

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Your battery should provide your laptop with power for several hours without needing to be plugged into a power source. With numerous charging cycles, the battery’s capacity will decrease over time. If you find you are having to charge your laptop too often or it simply won’t store a charge at all, you should consider replacing the battery.

Be sure the laptop is powered off before replacing the battery.

What you need

Step 1

              Back Cover               

• Before you begin taking apart the computer, make sure that it is completely powered off.
• Slide the release latch away from the nearest edge.
• Slide the back cover off of the computer.

Before you begin taking apart the computer, make sure that it is completely powered off.

Slide the release latch away from the nearest edge.

Slide the back cover off of the computer.

1024

Step 2

• Remove the six 3.7mm Phillips screws.
• Slide the back cover until it clicks, then lift it straight off.

Remove the six 3.7mm Phillips screws.

Slide the back cover until it clicks, then lift it straight off.

Step 3

              Battery               

• Disconnect the multi-colored battery cable from the main assembly by gently pulling upward on it.

Disconnect the multi-colored battery cable from the main assembly by gently pulling upward on it.

Step 4

• Remove the two 3.8 mm Torx screws using M8 Torx screwdriver.
• Remove the battery by pulling it straight out away from the computer.
• It is much easier to use the battery cable to carefully lift the battery off than to try to pry it off with tools.

Remove the two 3.8 mm Torx screws using M8 Torx screwdriver.

Remove the battery by pulling it straight out away from the computer.

It is much easier to use the battery cable to carefully lift the battery off than to try to pry it off with tools.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.                                             

Author

                                      with 6 other contributors 

                    Abby Lentz                     

Member since: 04/21/2015

584 Reputation

                                      4 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 14-8, Amido Spring 2015                        

                                                  Member of Cal Poly, Team 14-8, Amido Spring 2015 



                    CPSU-AMIDO-S15S14G8                     


                                            4 Members                     


                                            12 Guides authored