Hp Envy 14 Screen Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          30 minutes

Sections

Screen
9 steps

Flags

BackHP Envy 14
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Screen

With your laptop turned off and facing down, locate the battery.
Slide and hold the black tabs while removing the battery. One of the black tabs may lock in place once slided over.

With your laptop turned off and facing down, locate the battery.

Slide and hold the black tabs while removing the battery. One of the black tabs may lock in place once slided over.

1024

Step 2

Flip your laptop back over and open it up.
The black circles are stickers.
Peel off the 2 black stickers directly above the two hinges to reveal the screws.

Flip your laptop back over and open it up.

The black circles are stickers.

Peel off the 2 black stickers directly above the two hinges to reveal the screws.

Step 3

Use the 4mm Phillips Srewdriver to remove the 2 screws you just uncovered.
Make sure to put the 2 screws in a safe place so that you don’t lose them! A small bowl or container would work perfectly.

Use the 4mm Phillips Srewdriver to remove the 2 screws you just uncovered.

Make sure to put the 2 screws in a safe place so that you don’t lose them! A small bowl or container would work perfectly.

Step 4

Use the plastic card or your fingernail to separate the black plastic border from the screen case.
You will hear a snapping sound but don’t worry, you are not breaking the plastic, the border will snap right back into place!

Use the plastic card or your fingernail to separate the black plastic border from the screen case.

You will hear a snapping sound but don’t worry, you are not breaking the plastic, the border will snap right back into place!

Step 5

Separate the border entirely by unsnapping the plastic snaps all the way around the screen until you can remove the border.

Separate the border entirely by unsnapping the plastic snaps all the way around the screen until you can remove the border.

Step 6

Use the 3mm Phillips Screwdriver to remove the 4 black screws found on the metal tabs above and below the corners of the screen.
Don’t get confused with the other black screws on the top corners. The ones you want to remove are located closer to the middle of the screen.
Lean the laptop cover back and unscrew the bottom 2 screws first so that the screen doesn’t fall over as you are removing the screws.
Put these 4 screws in a separate container so they do not get mixed up with the 2 screws you already removed.

Use the 3mm Phillips Screwdriver to remove the 4 black screws found on the metal tabs above and below the corners of the screen.

Don’t get confused with the other black screws on the top corners. The ones you want to remove are located closer to the middle of the screen.

Lean the laptop cover back and unscrew the bottom 2 screws first so that the screen doesn’t fall over as you are removing the screws.

Put these 4 screws in a separate container so they do not get mixed up with the 2 screws you already removed.

Step 7

Now that the screen is not screwed in, place it face down on the keyboard.

Now that the screen is not screwed in, place it face down on the keyboard.

Step 8

Gently peel off the bar code sticker that is connected to the video cable connector.

Gently peel off the bar code sticker that is connected to the video cable connector.

Step 9

Remove the video cable from the connector by gently pulling the gray tab out.

Remove the video cable from the connector by gently pulling the gray tab out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 5 other contributors

                    Noelle Ly

Member since: 09/29/2015

192 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team 10-5, Green Fall 2015                        

                                                  Member of Cal Poly, Team 10-5, Green Fall 2015 



                    CPSU-GREEN-F15S10G5                     


                                            3 Members                     


                                            4 Guides authored

willbjoern - Jun 9, 2016

GIbt ein neues Modell (Spectre)… da wirds mit dem Display dank Verklebung echt sch….

Agung Adhiasto - Aug 9, 2016

Hi, do you think this would work with HP Envy 15 TouchSmart? For blank screen problem, if it is not the display, it may be the ribbon. Which one is the ribbon in your instructions above? Thanks!

Introduction#

What you need#

Team#

Introduction

What you need

Team