Difficulty
Moderate
Steps
6
Time Required
Suggest a time??
Sections
2
- Front Panel Assembly
- 3 steps
- LCD
- 3 steps
Flags
3
Action Shots
Be an action hero! This guide needs images that better demonstrate how to perform specific actions.
Needs More Images
A few more images would make this guide’s procedures crystal clear.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackHP ElitePad 900
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Front Panel Assembly
- Unscrew the two 2.8mm Phillips #000 screws near the power connector.
Unscrew the two 2.8mm Phillips #000 screws near the power connector.
1024
Step 2
- Use a suction cup to pull the display assembly up.
Use a suction cup to pull the display assembly up.
Step 3
- Use the tip of a spudger to disconnect the two display ZIF connectors.
Use the tip of a spudger to disconnect the two display ZIF connectors.
Step 4
LCD
- Remove the four 1.6mm Phillips #000 screws securing the LCD to the digitizer.
Remove the four 1.6mm Phillips #000 screws securing the LCD to the digitizer.
Step 5
- Use the tip of a spudger to disconnect the ribbon cable ZIF connector.
Use the tip of a spudger to disconnect the ribbon cable ZIF connector.
Step 6
- Use a plastic opening tool to separate the LCD from the digitizer.
Use a plastic opening tool to separate the LCD from the digitizer.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 4 other contributors
Kyle Marques
Member since: 09/03/2015
847 Reputation
6 Guides authored
Badges:
14
+11 more badges
Team
USF Tampa, Team 12-4, Blackwell Fall 2015
Member of USF Tampa, Team 12-4, Blackwell Fall 2015
USFT-BLACKWELL-F15S12G4
4 Members
6 Guides authored