Hp Eliteone 800 G1 Removing Stand Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          3 - 5 minutes            

Sections

1

• Removing Stand
• 3 steps

Flags

0

• BackHP EliteOne 800 G1

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Removing Stand               

• Press locking latch on the bottom of the base of the stand.
• Pull the plastic cover off of the stand.

Press locking latch on the bottom of the base of the stand.

Pull the plastic cover off of the stand.

1024

Step 2

• Use a Torx T15 driver and stick it through the holes on the stand in order to remove the two 12mm screws on the back of the main unit.
• Tilt stand and lift up to remove it.

Use a Torx T15 driver and stick it through the holes on the stand in order to remove the two 12mm screws on the back of the main unit.

Tilt stand and lift up to remove it.

Step 3

• Use a Torx T15 driver to remove the single 10mm screw on the back panel.
• Pull the back panel toward the bottom of the device to remove it.

Use a Torx T15 driver to remove the single 10mm screw on the back panel.

Pull the back panel toward the bottom of the device to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Michael Ewing                     

Member since: 10/01/2015

980 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       Cal Poly, Team 1-24, Maness Fall 2015                        

                                                  Member of Cal Poly, Team 1-24, Maness Fall 2015 



                    CPSU-MANESS-F15S1G24                     


                                            4 Members                     


                                            14 Guides authored