Hp Elitebook X360 830 G7 Display Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

Display
8 steps

Flags

Confusing Text

Some of this guide’s text is confusing, duplicated, or off-topic. Clarify it by editing!

BackHP EliteBook x360 830 G7
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Display

Use an opening tool to remove the display from the laptop case. Place it in the area that you see the most give.
If you hear the plastic tabs “snapping” free, you should still be fine; just don’t crack the display.

Use an opening tool to remove the display from the laptop case. Place it in the area that you see the most give.

If you hear the plastic tabs “snapping” free, you should still be fine; just don’t crack the display.

1024

Step 2

With the screen removed, locate the pair of wires hidden underneath the two pieces of tape.

With the screen removed, locate the pair of wires hidden underneath the two pieces of tape.

Step 3

Use a plastic opening tool or nylon spudger to lift the metal digitizer-connector bracket.

Use a plastic opening tool or nylon spudger to lift the metal digitizer-connector bracket.

Step 4

Now that the bar is removed, pull the golden connector away from the silver base.
Now, the back of the display should look like this.

Now that the bar is removed, pull the golden connector away from the silver base.

Now, the back of the display should look like this.

Step 5

The next piece of tape that needs to be peeled but not removed is highlighted by the red rectangle.
Peel but do not remove the black piece of tape.

The next piece of tape that needs to be peeled but not removed is highlighted by the red rectangle.

Peel but do not remove the black piece of tape.

Step 6

Peel, but do not remove entirely, the clear piece of tape that was underneath the black tape.

Peel, but do not remove entirely, the clear piece of tape that was underneath the black tape.

Step 7

Pull the bronze “Brighton” chip from the tan connection base.

Pull the bronze “Brighton” chip from the tan connection base.

Step 8

If you can move your screen away from the computer, then you have successfully detached your display and can replace it.

If you can move your screen away from the computer, then you have successfully detached your display and can replace it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Jonathan Bond

Member since: 03/21/2022

207 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       University of Alabama, Team 2-1, Bedsole Spring 2022                        

                                                  Member of University of Alabama, Team 2-1, Bedsole Spring 2022 



                    UA-BEDSOLE-S22S2G1                     


                                            4 Members                     


                                            5 Guides authored

Confusing Text#

Introduction#

What you need#

Team#

Confusing Text

Introduction

What you need

Team