Hp Elitebook X360 830 G6 Disassembly Back Cover Repair Guide

Difficulty

Easy

Steps

4

Time Required

                          3 minutes            

Sections

1

• HP EliteBook x360 830 G6 Disassembly - Back cover
• 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackHP EliteBook 830 x360 G6

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Tools you will need before starting               

• T5 bit from your IFIXIT kit.
• iFixit’s 4 mm aluminum screwdriver handle with magnetic bit socket
• Spudger / Fixite Carbon Fiber
• iFixit Opening Tool / Individual

T5 bit from your IFIXIT kit.

iFixit’s 4 mm aluminum screwdriver handle with magnetic bit socket

Spudger / Fixite Carbon Fiber

iFixit Opening Tool / Individual

1024

Step 2

              Unscrewing               

• Using the T5 bit in your driver, unscrew (5) screws. See other image for close-up view of screw head.

Using the T5 bit in your driver, unscrew (5) screws. See other image for close-up view of screw head.

Step 3

              Pry and opening               

• Using your pry and opening tools, start above the hinges and work in the directions indicated in the image.

Using your pry and opening tools, start above the hinges and work in the directions indicated in the image.

Step 4

              Removing cover               

• The cover is still held in place by two magnets. Carefully pulling the cover from back to front should allow the magnets to breakfree and the cover to be completely removed.
• You can see the two Magnet strips on the underside of the cover. Also be careful not to break the slide in tabs (one is indicated with a magnified red circle).
• On the battery you can also see the metal strip the magnets connect.

The cover is still held in place by two magnets. Carefully pulling the cover from back to front should allow the magnets to breakfree and the cover to be completely removed.

You can see the two Magnet strips on the underside of the cover. Also be careful not to break the slide in tabs (one is indicated with a magnified red circle).

On the battery you can also see the metal strip the magnets connect.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Aaron Meakin                     

Member since: 05/03/2020

109 Reputation

                                      1 Guide authored                  



                       Badges:
                       2