Difficulty
Easy
Steps
2
Time Required
2 minutes
Sections
1
- Bottom Cover
- 2 steps
Flags
0
BackHP EliteBook x360 1030 G3
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Bottom Cover
- Be sure to power off and unplug your device before you begin your repair.
- Close the laptop and flip it so that the screen is on the surface of the table and the back plate is facing you.
- Remove the 3.3 mm screw near the top of the hinge using a T5 Torx screwdriver.
- Remove the remaining four 7.3 mm screws using the same screwdriver.
Be sure to power off and unplug your device before you begin your repair.
Close the laptop and flip it so that the screen is on the surface of the table and the back plate is facing you.
Remove the 3.3 mm screw near the top of the hinge using a T5 Torx screwdriver.
Remove the remaining four 7.3 mm screws using the same screwdriver.
1024
Step 2
- Separate the bottom cover from the laptop, starting from the upper corner and working your way around the edge.
- The plastic fastening may make cracking sounds when separating, but this is normal.
Separate the bottom cover from the laptop, starting from the upper corner and working your way around the edge.
The plastic fastening may make cracking sounds when separating, but this is normal.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 3 other contributors
Shea Charkowsky
Member since: 04/15/2019
711 Reputation
3 Guides authored
Badges:
11
+8 more badges
Team
Cal Poly, Team S2-G9, Maness Spring 2019
Member of Cal Poly, Team S2-G9, Maness Spring 2019
CPSU-MANESS-S19S2G9
4 Members
10 Guides authored
