Hp Elitebook Folio 9470M Trackpad Replacement Repair Guide

Difficulty

Moderate

Steps

8

Time Required

                          30 minutes            

Sections

1

• Trackpad
• 8 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Elitebook Folio 9470m

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Trackpad               

• Flip laptop over.

Flip laptop over.

1024

Step 2

• In the center of the laptop slide the black piece back till it turns red indicating it is unlocked and the battery can be removed.

In the center of the laptop slide the black piece back till it turns red indicating it is unlocked and the battery can be removed.

Step 3

• Remove the 2 Phillips head screws that attach the cover on the left.

Remove the 2 Phillips head screws that attach the cover on the left.

Step 4

• Remove the 4 Phillips screws holding the hard drive in place
• Remove by gently prying and pulling up on the tab and out.

Remove the 4 Phillips screws holding the hard drive in place

Remove by gently prying and pulling up on the tab and out.

Step 5

• Remove the 3 Phillips head screws holding the back plate in.
• Gently pull up and out to remove plate.

Remove the 3 Phillips head screws holding the back plate in.

Gently pull up and out to remove plate.

Step 6

• Remove all eighteen screws marked M2x3 and M2x5.
• Remove the remaining four Phillips head screws.

Remove all eighteen screws marked M2x3 and M2x5.

Remove the remaining four Phillips head screws.

Step 7

• Slowly pry and lift the frame up while checking for connected wires and ribbons that may be obstructing it.

Slowly pry and lift the frame up while checking for connected wires and ribbons that may be obstructing it.

Step 8

• Detach ribbon wires by gently lifting the grey flap and pulling them out.
• Do not pull hard on the wires.
• Push the track pad from the bottom and it should come right out.

Detach ribbon wires by gently lifting the grey flap and pulling them out.

Do not pull hard on the wires.

Push the track pad from the bottom and it should come right out.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Kenneth Bowers                     

Member since: 04/08/2016

1,333 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       UMass Dartmouth, Team S1-G1, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S1-G1, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S1G1                     


                                            4 Members                     


                                            19 Guides authored