Hp Elitebook Folio 9470M Ram Replacement Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          20 minutes            

Sections

1

• RAM
• 4 steps

Flags

0

• BackHP Elitebook Folio 9470m

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              RAM               

• Remove battery using this guide here.

Remove battery using this guide here.

1024

Step 2

• Unscrew 2 Phillips head screws, lift slightly up and out to remove hard drive cover.

Unscrew 2 Phillips head screws, lift slightly up and out to remove hard drive cover.

Step 3

• Remove the three Phillips screws from the back plate. Pull slightly up and out to remove the plate.
• These screws are also marked with a small RAM icon.

Remove the three Phillips screws from the back plate. Pull slightly up and out to remove the plate.

These screws are also marked with a small RAM icon.

Step 4

• Gently push out the small tabs on either side.
• The RAM should pop up and easily be taken out from there.

Gently push out the small tabs on either side.

The RAM should pop up and easily be taken out from there.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      6 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Kenneth Bowers                     

Member since: 04/08/2016

1,333 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges                           

Team

                       UMass Dartmouth, Team S1-G1, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S1-G1, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S1G1                     


                                            4 Members                     


                                            19 Guides authored                     

Mikael Salo - Apr 18, 2019

Reply

There are 2 black Philips screws more you have to loose, before you can open the back plate. One on the left side (near wifi card), and on right side.