Hp Elitebook Folio 9470M Keyboard Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          20 minutes

Sections

Keyboard
7 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

BackHP Elitebook Folio 9470m
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Keyboard

Flip laptop over.

Flip laptop over.

1024

Step 2

Remove battery by pushing slide over to red, lifting slightly up while pulling the battery out.

Remove battery by pushing slide over to red, lifting slightly up while pulling the battery out.

Step 3

Remove hard drive cover plate by unscrewing the 2 Phillips head screws and lifting slightly up and out.

Remove hard drive cover plate by unscrewing the 2 Phillips head screws and lifting slightly up and out.

Step 4

Remove back cover by unscrewing the 3 Phillips head screws, then lift the plate up and out.

Remove back cover by unscrewing the 3 Phillips head screws, then lift the plate up and out.

Step 5

Remove the 4 Phillips head keyboard screws.
The screws are also marked with small keyboard icons to distinguish them.

Remove the 4 Phillips head keyboard screws.

The screws are also marked with small keyboard icons to distinguish them.

Step 6

Flip the laptop over and locate the 2 tabs on the left or right sides. They will be slightly visible in the space between the keyboard and frame.
Using a plastic opening tool, push the tabs in while pulling up to disconnect the tabs from the keyboard frame.
Once both tabs become unclipped, lift the keyboard up gently allowing it to slightly bend as the front and back tabs come out.

Flip the laptop over and locate the 2 tabs on the left or right sides. They will be slightly visible in the space between the keyboard and frame.

Using a plastic opening tool, push the tabs in while pulling up to disconnect the tabs from the keyboard frame.

Once both tabs become unclipped, lift the keyboard up gently allowing it to slightly bend as the front and back tabs come out.

Step 7

While lifting the keyboard up only enough to see underneath, unclip and remove the ribbon wire to fully detach the keyboard.

While lifting the keyboard up only enough to see underneath, unclip and remove the ribbon wire to fully detach the keyboard.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 5 other contributors

                    Kenneth Bowers

Member since: 04/08/2016

1,333 Reputation

                                      7 Guides authored                  



                       Badges:
                       13







                                                        +10 more badges

Team

                       UMass Dartmouth, Team S1-G1, Valliere Fall 2018                        

                                                  Member of UMass Dartmouth, Team S1-G1, Valliere Fall 2018 



                    UMASSD-VALLIERE-F18S1G1                     


                                            4 Members                     


                                            19 Guides authored

Better Introduction#

Introduction#

What you need#

Team#

Better Introduction

Introduction

What you need

Team