Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Battery
- 4 steps
Flags
2
Better Introduction
Improve this guide by completing or revising its introduction.
Missing Details
Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.
BackHP EliteBook Folio 1040 G1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Battery
- Power the laptop off before beginning.
- Flip the laptop over so the model sticker faces up.
- Remove the eleven 4 mm screws from the back cover of the laptop using a Torx TR9 screwdriver.
Power the laptop off before beginning.
Flip the laptop over so the model sticker faces up.
Remove the eleven 4 mm screws from the back cover of the laptop using a Torx TR9 screwdriver.
1024
Step 2
- Starting from the hinge, lift the back cover off of the laptop.
Starting from the hinge, lift the back cover off of the laptop.
Step 3
- Remove the six 3 mm screws securing the battery to the laptop using a Phillips #0 screwdriver.
Remove the six 3 mm screws securing the battery to the laptop using a Phillips #0 screwdriver.
Step 4
- While gently tugging on the battery’s connector, disconnect it from its port.
- Remove the battery from the device.
While gently tugging on the battery’s connector, disconnect it from its port.
Remove the battery from the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Andrew Gebo
Member since: 03/30/2022
210 Reputation
1 Guide authored
Badges:
3
Team
UMass Dartmouth, Team 2-6, Mellen Spring 2022
Member of UMass Dartmouth, Team 2-6, Mellen Spring 2022
UMASSD-MELLEN-S22S2G6
4 Members
1 Guide authored
