Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Wi-Fi Card
- 4 steps
Flags
0
BackHP EliteBook Folio 1020 G1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
Please remember to power down your computer and unplug it to avoid any power surges or shorts. Failing to power down and disconnect the power cable may result in further harm to the laptop or even yourself, so precautions must be taken.
What you need
Step 1
Wi-Fi Card
- Unscrew and remove seven 4.3mm Torx 8 screws and four 4.3mm Torx 8 screws.
- Pry up the plate with a plastic spudger.
Unscrew and remove seven 4.3mm Torx 8 screws and four 4.3mm Torx 8 screws.
Pry up the plate with a plastic spudger.
1024
Step 2
- Disconnect the two coaxial cables connected to the card.
- Be sure to remember which wire is which. It is easy to get these wires mixed up.
Disconnect the two coaxial cables connected to the card.
Be sure to remember which wire is which. It is easy to get these wires mixed up.
Step 3
- Use a Phillips #1 screwdriver to unscrew and remove the single 1.8 mm screw that secures the card to the board.
Use a Phillips #1 screwdriver to unscrew and remove the single 1.8 mm screw that secures the card to the board.
Step 4
- Lift the card slightly and then pull away from the port and remove.
Lift the card slightly and then pull away from the port and remove.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Drew Borden
Member since: 03/22/2022
579 Reputation
5 Guides authored
Badges:
4
+1 more badge
Team
UMass Dartmouth, Team 7-6, Sinclaire Spring 2022
Member of UMass Dartmouth, Team 7-6, Sinclaire Spring 2022
UMASSD-SINCLAIRE-S22S7G6
5 Members
5 Guides authored