Difficulty

Easy

Steps

6

Time Required

                          5 minutes

Sections

3

  • Battery
  • 2 steps
  • Back Panel
  • 2 steps
  • Hard Drive
  • 2 steps

Flags

0

  • BackHP EliteBook 8560w

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Keep in mind that your device should be turned off and disconnected from the power adapter.

Usually, a Hard Drive needs to be replaced when the computer won’t boot. However, check out our troubleshooting page to see if your issue falls into a different category.

Please follow instructions as they appear.

What you need

Step 1

              Battery
  • Make sure your device is powered off and disconnected from the power adapter.
  • Slide the lock all the way to the left. The battery should pop up.

Make sure your device is powered off and disconnected from the power adapter.

Slide the lock all the way to the left. The battery should pop up.

1024

Step 2

  • Pull the battery out.

Pull the battery out.

Step 3

              Back Panel
  • Slide the lock all the way to the right and remove the M2.5x8mm screw with a Philips #0 screwdriver.
  • Make sure your device is turned off and your battery is removed.

Slide the lock all the way to the right and remove the M2.5x8mm screw with a Philips #0 screwdriver.

Make sure your device is turned off and your battery is removed.

Step 4

  • Slide the panel towards you and lift it up to open and access the back of the computer.

Slide the panel towards you and lift it up to open and access the back of the computer.

Step 5

              Hard Drive
  • Make sure your device is powered off and its battery removed.
  • Remove the four M2.5x8mm screws with Phillips #0 screwdriver and lift up the panel to access your Hard Drive.

Make sure your device is powered off and its battery removed.

Remove the four M2.5x8mm screws with Phillips #0 screwdriver and lift up the panel to access your Hard Drive.

Step 6

  • Remove the M2.5x8mm screw with Phillips #0 screwdriver.
  • Slide the hard drive to the left and lift it to remove it.

Remove the M2.5x8mm screw with Phillips #0 screwdriver.

Slide the hard drive to the left and lift it to remove it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Alexandre  Mota

Member since: 01/14/2020

432 Reputation

                                      4 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Embry-Riddle Aeronautical University, Team S16-G7, Branham Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S16-G7, Branham Spring 2020 



                    ERAU-BRANHAM-S20S16G7                     


                                            3 Members                     


                                            6 Guides authored