Difficulty

Moderate

Steps

4

Time Required

                          25 seconds

Sections

1

  • Keyboard
  • 4 steps

Flags

3

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackHP EliteBook 850 G5

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Remove the bottom cover
  • To remove the laptops bottom cover ten phillips head screws will need to be loosened but not removed from the bottom cover. These screws will remain in place when removing the bottom cover.

To remove the laptops bottom cover ten phillips head screws will need to be loosened but not removed from the bottom cover. These screws will remain in place when removing the bottom cover.

1024

Step 2

  • An opening tool will be need to seperate the bottom cover from the main chassie.

An opening tool will be need to seperate the bottom cover from the main chassie.

Step 3

              Remove Laptop Battery
  • Six Hex? head screws hold the battery in place. Remove screws and battery.

Six Hex? head screws hold the battery in place. Remove screws and battery.

Step 4

              Remove Keyboard
  • There are three phillips head screws that keep the keyboard attached to the laptop. Screws holes will be marked with a KB to signify which to remove.
  • A hole next to the heat sink fan will be marked with a picture of a keyboard. Using tweezers, push the keyboard loose until the ribbon cables are exposed.
  • Disconnect ribbon cables for keyboard, backlight, and, finger mouse?
  • Not all models come with backlight and finger mouse? options.

There are three phillips head screws that keep the keyboard attached to the laptop. Screws holes will be marked with a KB to signify which to remove.

A hole next to the heat sink fan will be marked with a picture of a keyboard. Using tweezers, push the keyboard loose until the ribbon cables are exposed.

Disconnect ribbon cables for keyboard, backlight, and, finger mouse?

Not all models come with backlight and finger mouse? options.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 


                    John Duross

Member since: 08/10/2020

121 Reputation

                                      1 Guide authored                  



                       Badges:
                       2