Hp Elitebook 850 G3 Fan Replacement Repair Guide

Difficulty

Moderate

Steps

9

Time Required

                          8 minutes            

Sections

2

• Battery
• 5 steps
• Fan
• 4 steps

Flags

1

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

• BackHP EliteBook 850 G3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Turn off your laptop before starting.
• Flip the laptop over so the model stickers face up.

Turn off your laptop before starting.

Flip the laptop over so the model stickers face up.

1024

Step 2

              Unscrew the bottom               

• Use a Phillips #0 screwdriver to remove eleven 5.7mm screws.

Use a Phillips #0 screwdriver to remove eleven 5.7mm screws.

Step 3

• Insert the iFixit opening pick underneath the plastic back of the laptop. Use force to pry the back off.

Insert the iFixit opening pick underneath the plastic back of the laptop. Use force to pry the back off.

Step 4

              Remove the battery screws               

• Use the Phillips #0 screwdriver to remove the two battery screws.
• The two battery screws are captured screws and do not come out.

Use the Phillips #0 screwdriver to remove the two battery screws.

The two battery screws are captured screws and do not come out.

Step 5

              Lift the battery               

• Lift and pull the flap located at the top of the battery to remove it.

Lift and pull the flap located at the top of the battery to remove it.

Step 6

              Fan               

• Remove the plastic frame.

Remove the plastic frame.

Step 7

• Use the Phillips #0 screwdriver to unscrew the four captured screws at the end of the heat pipe.

Use the Phillips #0 screwdriver to unscrew the four captured screws at the end of the heat pipe.

Step 8

• Unplug the fan wires.

Unplug the fan wires.

Step 9

• Remove the fan.

Remove the fan.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Annabeth Grover                     

Member since: 10/10/2019

914 Reputation

                                      5 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       USF Tampa, Team S1-G1, Leahy Fall 2019                        

                                                  Member of USF Tampa, Team S1-G1, Leahy Fall 2019 



                    USFT-LEAHY-F19S1G1                     


                                            4 Members                     


                                            5 Guides authored