Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes

Sections

1

  • Battery
  • 5 steps

Flags

0

  • BackHP EliteBook 745 G4

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Prepare your device
  • Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
  • Disconnect the power from the computer by unplugging the power cord from the computer.
  • Disconnect all external devices from the computer.
  • Turn the computer upside down on a flat surface.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Turn the computer upside down on a flat surface.

1024

Step 2

              Remove the rubber plugs
  • Remove the 10 rubber plugs from the bottom cover.
  • Remove the SD card blank from the bottom cover.

Remove the 10 rubber plugs from the bottom cover.

Remove the SD card blank from the bottom cover.

Step 3

              Remove the bottom cover screws
  • Remove the 10 Phillips PM2.5x5.0 screws in the following order.
  • After you remove the PM2.5×5.0 screws, remove the PM2.0×7.0 screw.

Remove the 10 Phillips PM2.5x5.0 screws in the following order.

After you remove the PM2.5×5.0 screws, remove the PM2.0×7.0 screw.

Step 4

              Remove the bottom cover
  • Pry up on the top (near the display hinge) of the bottom cover to disengage it from the computer. Consider using a spudger.

Pry up on the top (near the display hinge) of the bottom cover to disengage it from the computer. Consider using a spudger.

Step 5

              Remove the battery
  • Loosen the two captive screws and remove the battery from the computer

Loosen the two captive screws and remove the battery from the computer

To replace the battery & reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor 


                    Max Kletskov

Member since: 04/22/2020

37,916 Reputation

                                      15 Guides authored                  



                       Badges:
                       19







                                                        +16 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,772 Guides authored