Hp Elitebook 745 G2 Cooling System Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 minutes            

Sections

2

• Battery
• 3 steps
• Cooling System
• 4 steps

Flags

0

• BackHP EliteBook 745 G2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Gently place the laptop down on a suitable workplace with the back of the laptop facing up

Gently place the laptop down on a suitable workplace with the back of the laptop facing up

1024

Step 2

• Remove the cover by sliding the lock to the left. You will hear a click once the cover has been unlocked. Gently push down on the cover and slide it towards you to remove it.

Remove the cover by sliding the lock to the left. You will hear a click once the cover has been unlocked. Gently push down on the cover and slide it towards you to remove it.

Step 3

• Gently lift up on the battery (represented by this cardboard cutout) until it disconnects. Once the battery is disconnected lift away from laptop.

Gently lift up on the battery (represented by this cardboard cutout) until it disconnects. Once the battery is disconnected lift away from laptop.

Step 4

              Cooling System               

• Attach the anti-static wrist strap to any metal part of the laptop to prevent electrical damage.

Attach the anti-static wrist strap to any metal part of the laptop to prevent electrical damage.

Step 5

• Using a Phillips #0, remove all seven of the 1.5 mm screws on the black plastic housing. Once all the screws are removed lift the plastic cover away.
• Remove the SD card slot cover and remove the 1.5 mm Phillips #0 screw located in the slot.

Using a Phillips #0, remove all seven of the 1.5 mm screws on the black plastic housing. Once all the screws are removed lift the plastic cover away.

Remove the SD card slot cover and remove the 1.5 mm Phillips #0 screw located in the slot.

Step 6

• Using the Phillips #0 screwdriver, remove the remaining five 1.5 mm screws holding the cooling system and fan to the motherboard.

Using the Phillips #0 screwdriver, remove the remaining five 1.5 mm screws holding the cooling system and fan to the motherboard.

Step 7

• Lift the fan and cooling system upwards until they become free from the computer.

Lift the fan and cooling system upwards until they become free from the computer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    James Reinemann                     

Member since: 09/18/2019

577 Reputation

                                      5 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Western Carolina University, Team S1-G3, Virtue Fall 2019                        

                                                  Member of Western Carolina University, Team S1-G3, Virtue Fall 2019 



                    WCU-VIRTUE-F19S1G3                     


                                            5 Members                     


                                            5 Guides authored