Difficulty
Easy
Steps
4
Time Required
5 - 7 minutes
Sections
2
- Back Cover
- 2 steps
- SSD
- 2 steps
Flags
0
BackHP EliteBook 1040 G4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
To complete this guide, you will need a #T5 Torx head screwdriver and a Phillips #00 screwdriver.
What you need
Step 1
Back Cover
- Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.
Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.
1024
Step 2
- Lift the back cover up and off the device.
Lift the back cover up and off the device.
Step 3
SSD
- Using the Phillips #00 screwdriver, remove the single 5 mm screw securing the SSD to the motherboard.
Using the Phillips #00 screwdriver, remove the single 5 mm screw securing the SSD to the motherboard.
Step 4
- Lift the SSD up and out of the device.
Lift the SSD up and out of the device.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Alexandra Sturgis
Member since: 09/28/2021
85 Reputation
1 Guide authored
Badges:
3
Team
Clemson, Team 4-1, Hunter Fall 2021
Member of Clemson, Team 4-1, Hunter Fall 2021
CLEM-HUNTER-F21S4G1
5 Members
5 Guides authored
