Hp Elitebook 1040 G4 Speakers Replacement Repair Guide

Difficulty

Easy

Steps

9

Time Required

                          10 - 15 minutes            

Sections

3

• Back Cover
• 2 steps
• Battery
• 3 steps
• Speakers
• 4 steps

Flags

0

• BackHP EliteBook 1040 G4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

To complete this guide, you will need a #T5 Torx head screwdriver and a Phillips #1 and #00 screwdriver.

Before beginning, be sure to completely power off your computer.

What you need

Step 1

              Back Cover               

• Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.

Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.

1024

Step 2

• Lift the back cover up and off the device.

Lift the back cover up and off the device.

Step 3

              Battery               

• Use a Phillips #00 screwdriver to remove the eight 4 mm screws securing the battery to the motherboard.

Use a Phillips #00 screwdriver to remove the eight 4 mm screws securing the battery to the motherboard.

Step 4

• Use a plastic spudger to carefully disconnect the battery pin connector from its port, slowly lifting the pin connector from each side until it releases.

Use a plastic spudger to carefully disconnect the battery pin connector from its port, slowly lifting the pin connector from each side until it releases.

Step 5

• Lift and remove the battery from the device.

Lift and remove the battery from the device.

Step 6

              Speakers               

• Using the Phillips #1 screwdriver, remove the four black 6 mm screws securing the speakers to the device.

Using the Phillips #1 screwdriver, remove the four black 6 mm screws securing the speakers to the device.

Step 7

• Disconnect the pin connector from the right side of the speaker assembly.

Disconnect the pin connector from the right side of the speaker assembly.

Step 8

• Carefully remove the red and black wires from the black clips in between the two speakers.

Carefully remove the red and black wires from the black clips in between the two speakers.

Step 9

• Remove the speakers from the device.

Remove the speakers from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Hannah DiMartino                     

Member since: 09/28/2021

395 Reputation

                                      3 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges                           

Team

                       Clemson, Team 4-1, Hunter Fall 2021                        

                                                  Member of Clemson, Team 4-1, Hunter Fall 2021 



                    CLEM-HUNTER-F21S4G1                     


                                            5 Members                     


                                            5 Guides authored