Difficulty
Moderate
Steps
6
Time Required
25 - 40 minutes
Sections
1
- Display
- 6 steps
Flags
0
BackHP EliteBook 1040 G4
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
To complete this guide, you will need a #T5 Torx head screwdriver and a Phillips #00 screwdriver. Additionally, a iFixit opening tool will be needed.
Before beginning, be sure to completely power off and unplug your computer.
What you need
Step 1
Display
- Wedge an opening tool between the display and the chassis, gently prying around the perimeter until the display completely releases.
Wedge an opening tool between the display and the chassis, gently prying around the perimeter until the display completely releases.
1024
Step 2
- Lift the metal arm, then pull the display ribbon cable directly out of its port.
Lift the metal arm, then pull the display ribbon cable directly out of its port.
Step 3
- Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.
Use a T5 Torx screwdriver to remove the eight 5 mm screws securing the back cover to the chassis.
Step 4
- Remove the hinge cover.
Remove the hinge cover.
Step 5
- Use a Phillips #00 screwdriver to remove the three 5 mm black screws that securing the dispaly.
Use a Phillips #00 screwdriver to remove the three 5 mm black screws that securing the dispaly.
Step 6
- Lift the display up and out of its housing.
Lift the display up and out of its housing.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 4 other contributors
SW Reeves
Member since: 02/10/2022
265 Reputation
2 Guides authored
Badges:
4
+1 more badge
Team
The Citadel Military College of South Carolina, Team 7-10, Eggleston Spring 2022
Member of The Citadel Military College of South Carolina, Team 7-10, Eggleston Spring 2022
CMCSC-EGGLESTON-S22S7G10
3 Members
3 Guides authored
