Hp Elite X2 G4 Battery Replacement Repair Guide

Difficulty

Easy

Steps

8

Time Required

                          30 minutes            

Sections

2

• Display Assembly
• 5 steps
• Battery
• 3 steps

Flags

3

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackHP Elite x2 G4

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Step 1

              Display Assembly               

• Open the kickstand.
• Remove the four 3 mm T5 Torx-head screws that secure the display assembly.

Open the kickstand.

Remove the four 3 mm T5 Torx-head screws that secure the display assembly.

1024

Step 2

• Use a suction sup to carefully detach the display assembly in the following order: top-right corner, top-left corner, bottom-right corner and bottom-left corner.

Use a suction sup to carefully detach the display assembly in the following order: top-right corner, top-left corner, bottom-right corner and bottom-left corner.

Step 3

• Slowly lift the display panel until you have access to the battery connector on the motherboard (approx. 90 degrees).

Slowly lift the display panel until you have access to the battery connector on the motherboard (approx. 90 degrees).

Step 4

• Disconnect the battery cable from its motherboard connector.
• Remove the tape that covers the touchscreen and display panel ZIF connectors.

Disconnect the battery cable from its motherboard connector.

Remove the tape that covers the touchscreen and display panel ZIF connectors.

Step 5

• Disconnect the touchscreen ribbon cable from the motherboard.
• Remove the display panel assembly.

Disconnect the touchscreen ribbon cable from the motherboard.

Remove the display panel assembly.

Step 6

              Battery               

• Remove the six 3.5 mm Phillips #1 screws that secure the battery to the display enclosure.

Remove the six 3.5 mm Phillips #1 screws that secure the battery to the display enclosure.

Step 7

• Carefully lift the top edge of the battery off of the alignment pins.
• Remove the battery.

Carefully lift the top edge of the battery off of the alignment pins.

Remove the battery.

Step 8

• Slide the bottom edge out from retention tabs on the display enclosure and remove.

Slide the bottom edge out from retention tabs on the display enclosure and remove.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Goncalo Felix                     

Member since: 10/25/2022

325 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       UMass Dartmouth, Team 4-4, Sinclaire Fall 2022                        

                                                  Member of UMass Dartmouth, Team 4-4, Sinclaire Fall 2022 



                    UMASSD-SINCLAIRE-F22S4G4                     


                                            5 Members                     


                                            3 Guides authored