Difficulty

Moderate

Steps

4

Time Required

                          10 minutes            

Sections

1

  • Screen
  • 4 steps

Flags

0

  • BackHP Elite X2 1013 G3

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Screen               
  • Flip the device over so the base is facing the ceiling.
  • Lift up the tablet stand.
  • Remove the four 2 mm screws from the tablet using a T5 Torx screwdriver.

Flip the device over so the base is facing the ceiling.

Lift up the tablet stand.

Remove the four 2 mm screws from the tablet using a T5 Torx screwdriver.

1024

Step 2

  • Flip the tablet over with the screen facing upwards.
  • Place the suction handle in the center of the screen and slowly lift off the screen until it is at a 30 degree angle, starting by gently prying up the bottom.
  • Do not pull the screen beyond a 30 degree angle. Additional internal components must be disconnected first.

Flip the tablet over with the screen facing upwards.

Place the suction handle in the center of the screen and slowly lift off the screen until it is at a 30 degree angle, starting by gently prying up the bottom.

Do not pull the screen beyond a 30 degree angle. Additional internal components must be disconnected first.

Step 3

  • With the screen lifted at a 30 degree angle, gently disconnect the yellow ribbon cable at the end connected to the screen.
  • Gently disconnect the orange ribbon cable at the end connected to the bottom plate.

With the screen lifted at a 30 degree angle, gently disconnect the yellow ribbon cable at the end connected to the screen.

Gently disconnect the orange ribbon cable at the end connected to the bottom plate.

Step 4

  • Remove the screen from the tablet.

Remove the screen from the tablet.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 2 other contributors 

                    Maximillian Shaw Tiberghien                     

Member since: 09/20/2021

208 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       The Citadel Military College of South Carolina, Team 2-18, Eggleston Fall 2021                        

                                                  Member of The Citadel Military College of South Carolina, Team 2-18, Eggleston Fall 2021 



                    CMCSC-EGGLESTON-F21S2G18                     


                                            2 Members                     


                                            3 Guides authored