Hp Elite X2 1012 G2 Screen Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

1

• Screen
• 6 steps

Flags

0

• BackHP Elite x2 1012 G2

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Screen               

• Make sure the device is turned off before starting.
• Orient the device so the back is facing you, with the kickstand up.

Make sure the device is turned off before starting.

Orient the device so the back is facing you, with the kickstand up.

1024

Step 2

• Remove the six 3mm Torx T5 screws underneath the kickstand.

Remove the six 3mm Torx T5 screws underneath the kickstand.

Step 3

• Turn the device over so the screen is facing you.
• Place a suction cup firmly onto a corner of the screen.
• Lift up gently until you see the screen separate from the casing.
• Repeat this process for all four corners.

Turn the device over so the screen is facing you.

Place a suction cup firmly onto a corner of the screen.

Lift up gently until you see the screen separate from the casing.

Repeat this process for all four corners.

Step 4

• Lift the screen up and off of the device.
• Pry each corner up first, otherwise you may damage or crack the screen.

Lift the screen up and off of the device.

Pry each corner up first, otherwise you may damage or crack the screen.

Step 5

• Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

Remove the two connectors on the back of the screen by lifting the connector tabs on the motherboard with a plastic opening tool and pulling gently.

Step 6

• Remove the screen by gently lifting it off of the device.

Remove the screen by gently lifting it off of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Noah Stapp                     

Member since: 04/18/2018

668 Reputation

                                      2 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       Cal Poly, Team S18-G5, Livingston Spring 2018                        

                                                  Member of Cal Poly, Team S18-G5, Livingston Spring 2018 



                    CPSU-LIVINGSTON-S18S18G5                     


                                            4 Members                     


                                            13 Guides authored                     

Greg M - Dec 29, 2018

Reply

Where can I purchase a screen for the HP Elite x2 1012 g2?

CILLIAN BYRNE - Jul 6, 2019

Reply

just completed this, VERY surprising to find a HP product with an easy install

Richard Taylor - Jul 17, 2019

Reply

Just finished a repair and very easy to do. Thank you!!

el._.msn - Jun 10, 2020

Reply

The touch stopped working after the replacement. Any suggestions?

iamacomputertech - Oct 19, 2020

Reply

I replaced my screen and upon turning the device on I have a black screen. Already made sure connections are all attached correctly. Tried hard reset with power and volume button down for 15 seconds. A bad new screen? Any other ideas?