Hp Dv5 1125Nr Hard Drive Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 25 minutes            

Sections

2

• Battery
• 2 steps
• Hard Drive
• 5 steps

Flags

0

• BackHP dv5-1125nr

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Ensure your computer is shut down. Removing the battery while the laptop is still on may corrupt your files. Remove any power adapters and cords connected to the laptop body.
• Slide the switch to the left until the release clicks.

Ensure your computer is shut down. Removing the battery while the laptop is still on may corrupt your files. Remove any power adapters and cords connected to the laptop body.

Slide the switch to the left until the release clicks.

1024

Step 2

• Remove the battery.
• The release switch may need to be held down while removing the battery.

Remove the battery.

The release switch may need to be held down while removing the battery.

Step 3

              Hard Drive               

• Remove the two 5mm Phillips screws on the hard drive cover using a Phillips #00 screwdriver.

Remove the two 5mm Phillips screws on the hard drive cover using a Phillips #00 screwdriver.

Step 4

• Remove the plastic hard drive cover.

Remove the plastic hard drive cover.

Step 5

• Pull up on the two plastic flaps on the hard drive enclosure to remove it.

Pull up on the two plastic flaps on the hard drive enclosure to remove it.

Step 6

• Gently lift the ribbon cable away from the hard drive enclosure to free the drive.

Gently lift the ribbon cable away from the hard drive enclosure to free the drive.

Step 7

• Locate four 2mm Phillips screws on the side of the enclosure and remove them using a Phillips #00 screwdriver.
• Slide the hard drive out of the enclosure to complete the removal process.

Locate four 2mm Phillips screws on the side of the enclosure and remove them using a Phillips #00 screwdriver.

Slide the hard drive out of the enclosure to complete the removal process.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 4 other contributors 

                    Nick Loey                     

Member since: 04/01/2014

1,661 Reputation

                                      8 Guides authored                  



                       Badges:
                       14







                                                        +11 more badges                           

Team

                       Cal Poly, Team 9-15, Regan Spring 2014                        

                                                  Member of Cal Poly, Team 9-15, Regan Spring 2014 



                    CPSU-REGAN-S14S9G15                     


                                            4 Members                     


                                            10 Guides authored