Hp Deskjet D1660 Encoder Strip Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          15 - 30 minutes            

Sections

1

• Encoder Strip
• 5 steps

Flags

0

• BackHP Deskjet D1660

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Encoder Strip               

• Remove the back two 14.0 mm Torx #10 screws.

Remove the back two 14.0 mm Torx #10 screws.

1024

Step 2

• Lay the printer on its back.
• Grab the paper tray by its right side and pull it to the left and up.

Lay the printer on its back.

Grab the paper tray by its right side and pull it to the left and up.

Step 3

• Open the frontal access panel by lifting it from the top.
• Similar to the paper tray, grab it from the right side and pull it to the left and up.

Open the frontal access panel by lifting it from the top.

Similar to the paper tray, grab it from the right side and pull it to the left and up.

Step 4

• Take out the two frontal 14.0 mm Torx #10 screws.
• Carefully lift the frontal cover.
• Don’t lift it up aggressively. A strip will be attached to it.

Take out the two frontal 14.0 mm Torx #10 screws.

Carefully lift the frontal cover.

Don’t lift it up aggressively. A strip will be attached to it.

Step 5

• Looking at the printer from the front, carefully unhook the encoder strip from the left side.
• Pull the strip to the left and push a little to unhook the strip.
• Do the same thing on the other side by pulling to the right and pushing a little.
• Pull the strip completely out from the cartridge holder.

Looking at the printer from the front, carefully unhook the encoder strip from the left side.

Pull the strip to the left and push a little to unhook the strip.

Do the same thing on the other side by pulling to the right and pushing a little.

Pull the strip completely out from the cartridge holder.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Justin Taiki Fukada                     

Member since: 01/25/2014

846 Reputation

                                      7 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges                           

Team

                       Cal Poly, Team 1-41, Maness Winter 2014                        

                                                  Member of Cal Poly, Team 1-41, Maness Winter 2014 



                    CPSU-MANESS-W14S1G41                     


                                            4 Members                     


                                            7 Guides authored