Difficulty

Moderate

Steps

6

Time Required

                          30 minutes

Sections

1

  • Scanner Glass
  • 6 steps

Flags

2

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackHP Deskjet 2624

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Scanner Glass
  • Unplug all cords from the printer, and remove all the paper from the tray.

Unplug all cords from the printer, and remove all the paper from the tray.

1024

Step 2

  • Remove the four screws securing the scanner bed module to the printer body with a Torx T5 screwdriver.

Remove the four screws securing the scanner bed module to the printer body with a Torx T5 screwdriver.

Step 3

  • Gently pry the scanner bed cover slightly off of the printer at the hinge.
  • Lifting the scanning bed cover to a 45 degree angle may make it easier to remove.

Gently pry the scanner bed cover slightly off of the printer at the hinge.

Lifting the scanning bed cover to a 45 degree angle may make it easier to remove.

Step 4

  • Lift up the scanner bed module and remove the two ribbon cables by pulling them straight out.
  • Set the printer body aside.

Lift up the scanner bed module and remove the two ribbon cables by pulling them straight out.

Set the printer body aside.

Step 5

  • Separate the plastic halves of the scanner bed by gently pulling the tabs on the clips holding the halves together.
  • Pull the halves apart while undoing the clips to prevent plastic snapping.

Separate the plastic halves of the scanner bed by gently pulling the tabs on the clips holding the halves together.

Pull the halves apart while undoing the clips to prevent plastic snapping.

Step 6

  • Remove the glass pane from the plastic shell by prying the tabs back that secure the glass, as well as peeling the adhesive apart slowly.
  • Glass edges can be sharp, handle glass and glass shards with gloves.

Remove the glass pane from the plastic shell by prying the tabs back that secure the glass, as well as peeling the adhesive apart slowly.

Glass edges can be sharp, handle glass and glass shards with gloves.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Geoffrey Huse

Member since: 01/16/2020

136 Reputation

                                      1 Guide authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Embry-Riddle Aeronautical University, Team S6-G12, Rauch Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S6-G12, Rauch Spring 2020 



                    ERAU-RAUCH-S20S6G12                     


                                            4 Members                     


                                            5 Guides authored