Difficulty

Moderate

Steps

4

Time Required

                          20 minutes

Sections

1

  • Motherboard
  • 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Deskjet 2624

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Motherboard
  • Unplug all cords from the printer and remove the paper.

Unplug all cords from the printer and remove the paper.

1024

Step 2

  • Using the Torx T5 screwdriver, remove the four screws connecting the scanner bed module to the printer base.

Using the Torx T5 screwdriver, remove the four screws connecting the scanner bed module to the printer base.

Step 3

  • Gently lift the scanner bed module slightly off of the printer base. Be sure to carefully unplug the ribbon cables before fully removing the scanner bed.
  • Unplug the ribbon cables by pulling them gently straight out of their plugs.

Gently lift the scanner bed module slightly off of the printer base. Be sure to carefully unplug the ribbon cables before fully removing the scanner bed.

Unplug the ribbon cables by pulling them gently straight out of their plugs.

Step 4

  • Remove the cables connected to the motherboard by gently pulling them straight out. Do not unplug the cables by pulling on the wires.
  • Unplug the last two ribbons connected to the motherboard by gently pulling them straight out.
  • Be sure to take note of where all plugs and ribbons are connected to the motherboard.
  • Remove the motherboard from the device.

Remove the cables connected to the motherboard by gently pulling them straight out. Do not unplug the cables by pulling on the wires.

Unplug the last two ribbons connected to the motherboard by gently pulling them straight out.

Be sure to take note of where all plugs and ribbons are connected to the motherboard.

Remove the motherboard from the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Ryan Doyle

Member since: 01/16/2020

551 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Embry-Riddle Aeronautical University, Team S6-G12, Rauch Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S6-G12, Rauch Spring 2020 



                    ERAU-RAUCH-S20S6G12                     


                                            4 Members                     


                                            5 Guides authored