Hp Deskjet 1000 J110A Parts Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          5 minutes            

Sections

1

• Cover Removal
• 3 steps

Flags

0

• BackHP Deskjet 1000 J110a

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cover Removal               

• Remove the two 13 mm screws located on the back of the printer using a screwdriver with the T10 torx bit (star-shaped).

Remove the two 13 mm screws located on the back of the printer using a screwdriver with the T10 torx bit (star-shaped).

1024

Step 2

• In the front of the printer, open the tray where the paper comes out and remove the two 13 mm screws located under the top of the printer.

In the front of the printer, open the tray where the paper comes out and remove the two 13 mm screws located under the top of the printer.

Step 3

• With the front of the printer facing you, lift and raise the left side of the panel (like opening a book in reverse) until it disconnects from the clip on the right side of the panel.

With the front of the printer facing you, lift and raise the left side of the panel (like opening a book in reverse) until it disconnects from the clip on the right side of the panel.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Colin Tourjee                     

Member since: 01/29/2018

632 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team S5-G3, Passmore Spring 2018                        

                                                  Member of USF Tampa, Team S5-G3, Passmore Spring 2018 



                    USFT-PASSMORE-S18S5G3                     


                                            4 Members                     


                                            6 Guides authored                     

Krzysztof Białkowski - Feb 13, 2020

Reply

Very intuitive, good instructions. Highly recommended.

karenliller@comcast.net - Apr 13, 2020

Reply

Thank you very much for the instructions on removing the cover to the HP 1200 Deskjet. It allowed me to removed a part that fell into the printer and prevented the paper from advancing.