Hp Compaq Nc6400 Bluetooth Module Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Battery
4 steps
Bluetooth Module
4 steps

Flags

BackHP Compaq nc6400
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Battery

Turn off and unplug laptop.

Turn off and unplug laptop.

1024

Step 2

Locate the battery lock below the battery labeled one.
Slide the lock all the way to the left to release the left lock of the battery.

Locate the battery lock below the battery labeled one.

Slide the lock all the way to the left to release the left lock of the battery.

Step 3

Locate the lock labeled two at the bottom right corner below the battery.
Slide and hold the lock to the left.

Locate the lock labeled two at the bottom right corner below the battery.

Slide and hold the lock to the left.

Step 4

Once both the battery locks are unlocked, slide the battery out to remove.

Once both the battery locks are unlocked, slide the battery out to remove.

Step 5

              Bluetooth Module

Flip the computer top down and locate the second to-the-right 1.2 Philips #1 screw in the bottom-left corner.
Remove the screw.

Flip the computer top down and locate the second to-the-right 1.2 Philips #1 screw in the bottom-left corner.

Remove the screw.

Step 6

Lift the right side of the Bluetooth Module cover upwards.
Slide the spudger under the lifted case, and slide it left towards the closed end. The case will pop open and be removed from the compartment.

Lift the right side of the Bluetooth Module cover upwards.

Slide the spudger under the lifted case, and slide it left towards the closed end. The case will pop open and be removed from the compartment.

Step 7

Locate the Bluetooth Module after removing the cover.
Using the spudger, push the module to the right (i.e. towards the screw hole).
Pull outwards and remove bluetooth module and wire from casing.

Locate the Bluetooth Module after removing the cover.

Using the spudger, push the module to the right (i.e. towards the screw hole).

Pull outwards and remove bluetooth module and wire from casing.

Step 8

Once the module and wire are completely outside of the casing, gently pull apart the wire from the module clip.

Once the module and wire are completely outside of the casing, gently pull apart the wire from the module clip.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 8 other contributors

                    Yoshitake Yamada

Member since: 09/30/2013

266 Reputation

                                      2 Guides authored                  



                       Badges:
                       7







                                                        +4 more badges

Team

                       Cal Poly, Team 14-6, Forte Fall 2013                        

                                                  Member of Cal Poly, Team 14-6, Forte Fall 2013 



                    CPSU-FORTE-F13S14G6                     


                                            5 Members                     


                                            5 Guides authored

Alain Bastien - Aug 7, 2018

Hi,

My HP nx9420 did not have the Bluetooth. I wish to install one. I got one from my old HP nx9420. it Part Number is 397922-001 but the actual laptop says it requires the 409993-001 are these module the same ?

thanks

Alain

Introduction#

What you need#

Team#

Introduction

What you need

Team