Hp Compaq Nc6120 Monitor Replacement Repair Guide

Difficulty

Easy

Steps

6

Time Required

                          5 - 10 minutes            

Sections

1

• Monitor
• 6 steps

Flags

2

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

• BackHP Compaq NC6120

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Monitor               

• Locate and remove four black 5.1mm Phillips #1 screws from the left and right sides of the monitor.

Locate and remove four black 5.1mm Phillips #1 screws from the left and right sides of the monitor.

1024

Step 2

• Using a small spudger, remove the four black plastic covers from above the monitor, revealing screws underneath.

Using a small spudger, remove the four black plastic covers from above the monitor, revealing screws underneath.

Step 3

• Remove the four screws that were just uncovered. They are 6.2mm 3.0 flathead screws.

Remove the four screws that were just uncovered. They are 6.2mm 3.0 flathead screws.

Step 4

• Pry off the plastic case surrounding the monitor.
• A spudger may be needed to pry off the case.

Pry off the plastic case surrounding the monitor.

A spudger may be needed to pry off the case.

Step 5

• Remove the black and silver cable, located directly below the monitor.
• Proceed to pull monitor approximately 10cm away from the back of the laptop case.

Remove the black and silver cable, located directly below the monitor.

Proceed to pull monitor approximately 10cm away from the back of the laptop case.

Step 6

• Remove the grey cable (with yellow tip) connecting the monitor to the back plastic casing and the monitor will be free from the rest of the laptop.

Remove the grey cable (with yellow tip) connecting the monitor to the back plastic casing and the monitor will be free from the rest of the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             

Author

                                      with 3 other contributors 

                    Mateo Cuellar                     

Member since: 04/08/2015

598 Reputation

                                      4 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 17-4, Forte Spring 2015                        

                                                  Member of Cal Poly, Team 17-4, Forte Spring 2015 



                    CPSU-FORTE-S15S17G4                     


                                            3 Members                     


                                            6 Guides authored