Difficulty
Moderate
Steps
4
Time Required
10 - 15 minutes
Sections
1
- Cooling Fan
- 4 steps
Flags
Bullets!
Better coordination with markups and the color/type of bullets will help make this guide more clear!
BackHP Compaq NC6120
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Cooling Fan
- Locate cooling fan directly to the left of copper heat sink.
Locate cooling fan directly to the left of copper heat sink.
1024
Step 2
- Locate the black/grey/brown colored cord and carefully disconnect it from the motherboard.
- Place cord off to the side so that it is out of the way.
Locate the black/grey/brown colored cord and carefully disconnect it from the motherboard.
Place cord off to the side so that it is out of the way.
Step 3
- Locate and remove the two 7.0mm Phillips #1 screws on the top left and top right corners of the cooling fan.
Locate and remove the two 7.0mm Phillips #1 screws on the top left and top right corners of the cooling fan.
Step 4
- Remove the fan from its spot.
Remove the fan from its spot.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Mateo Cuellar
Member since: 04/08/2015
598 Reputation
4 Guides authored
Badges:
9
+6 more badges
Team
Cal Poly, Team 17-4, Forte Spring 2015
Member of Cal Poly, Team 17-4, Forte Spring 2015
CPSU-FORTE-S15S17G4
3 Members
6 Guides authored
