Difficulty

Moderate

Steps

6

Time Required

                          5 minutes

Sections

2

  • Keyboard
  • 4 steps
  • Power Button Panel
  • 2 steps

Flags

1

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

  • BackHP Compaq 6710b

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • Turn off computer before starting.
  • Flip to the backside of the laptop.
  • Using a Phillips #1 screwdriver, unscrew the 5mm screw and take off the shown cover.
  • Using the same screwdriver, unscrew the 8mm screws.
  • The screws may not completely fall out of the laptop, just ensure they are unscrewed as far as they will go.

Turn off computer before starting.

Flip to the backside of the laptop.

Using a Phillips #1 screwdriver, unscrew the 5mm screw and take off the shown cover.

Using the same screwdriver, unscrew the 8mm screws.

The screws may not completely fall out of the laptop, just ensure they are unscrewed as far as they will go.

1024

Step 2

  • Flip over the laptop to the top side, and open the laptop.
  • Slide the locking tabs down using a blue plastic opening tool or your fingernail.

Flip over the laptop to the top side, and open the laptop.

Slide the locking tabs down using a blue plastic opening tool or your fingernail.

Step 3

  • Using the plastic prying tool, lift the keyboard gently towards you.
  • Don’t take the keyboard completely off because it is still attached with a ribbon cable to the computer.

Using the plastic prying tool, lift the keyboard gently towards you.

Don’t take the keyboard completely off because it is still attached with a ribbon cable to the computer.

Step 4

  • Pull up on both sides of the black locking tab of the connector.
  • The keyboard should now be free of the computer.

Pull up on both sides of the black locking tab of the connector.

The keyboard should now be free of the computer.

Step 5

              Power Button Panel
  • Put a finger under each side of the plastic lock on the ribbon cable and pull up.

Put a finger under each side of the plastic lock on the ribbon cable and pull up.

Step 6

  • Using a flathead screwdriver, get under each plastic hinge cover until they pop.
  • Lift the right edge of plastic strip covering the power button and gently pull it up until the whole strip comes free.

Using a flathead screwdriver, get under each plastic hinge cover until they pop.

Lift the right edge of plastic strip covering the power button and gently pull it up until the whole strip comes free.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 2 other contributors 


                    Khulan Orgil

Member since: 04/14/2015

1,120 Reputation

                                      6 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges

Team

                       Cal Poly, Team 4-2, Maness Spring 2015                        

                                                  Member of Cal Poly, Team 4-2, Maness Spring 2015 



                    CPSU-MANESS-S15S4G2                     


                                            4 Members                     


                                            6 Guides authored