Difficulty
Easy
Steps
5
Time Required
6 minutes
Sections
1
- Rollers
- 5 steps
Flags
0
BackHP Color LaserJet Pro MFP M277dw
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Rollers
- Remove the bottom tray by pulling it until it fully is out of the printer.
Remove the bottom tray by pulling it until it fully is out of the printer.
1024
Step 2
- Turn the printer upside down.
- Pull out the white manual feed tray.
Turn the printer upside down.
Pull out the white manual feed tray.
Step 3
- Remove one Phillips #2 8mm screw.
Remove one Phillips #2 8mm screw.
Step 4
- Push on the exposed piece of rod that pokes out of one end of the roller.
- Pull out the now unscrewed and free rod.
Push on the exposed piece of rod that pokes out of one end of the roller.
Pull out the now unscrewed and free rod.
Step 5
- Use your thumb to push in the white plastic hanging over the roller and use your index finger to pry the roller out.
Use your thumb to push in the white plastic hanging over the roller and use your index finger to pry the roller out.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 2 other contributors
Yvan Gonzalez
Member since: 10/08/2018
283 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Cal Poly, Team S4-G2, White Fall 2018
Member of Cal Poly, Team S4-G2, White Fall 2018
CPSU-WHITE-F18S4G2
3 Members
5 Guides authored
MarkMcAndrew - Aug 7, 2021
Reply
Thank you!
Should the black roller just behind these two rollers also be replaced?
Best wishes
Mark
