Hp Color Laserjet Pro Mfp M277Dw Power Button Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 - 10 minutes

Sections

Power Button
3 steps

Flags

BackHP Color LaserJet Pro MFP M277dw
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Power Button

Lower the back panel by pulling it down.
Remove one Phillips #2 10mm screw.
Use the plastic opening tool to remove right side panel by prying it off.
Flipping the printer onto its side makes it easier to remove the side panel.

Lower the back panel by pulling it down.

Remove one Phillips #2 10mm screw.

Use the plastic opening tool to remove right side panel by prying it off.

Flipping the printer onto its side makes it easier to remove the side panel.

1024

Step 2

Lower the front panel by pulling it down from the upright position.
The button cover should come off with the panel, if it does not be sure to remove it.

Lower the front panel by pulling it down from the upright position.

The button cover should come off with the panel, if it does not be sure to remove it.

Step 3

Remove two Phillips #2 8mm screws.
Unplug the wire connecting the power button to the circuit board by gently pulling them apart.

Remove two Phillips #2 8mm screws.

Unplug the wire connecting the power button to the circuit board by gently pulling them apart.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 1 other contributor

                    Christopher Fahey

Member since: 10/08/2018

738 Reputation

                                      3 Guides authored                  



                       Badges:
                       10







                                                        +7 more badges

Team

                       Cal Poly, Team S4-G2, White Fall 2018                        

                                                  Member of Cal Poly, Team S4-G2, White Fall 2018 



                    CPSU-WHITE-F18S4G2                     


                                            3 Members                     


                                            5 Guides authored

Ajay Kumar Singh - Sep 12, 2019

How to make the catridge tray out ? As one side(left) of the tray is not coming out.

Sheila Shook - May 13, 2021

I am not sure if it’s the power button or power module. How do I determine that? Where do I get the parts?

Introduction#

What you need#

#

#

#

#

#

Team#

#

Introduction

What you need

Team