Difficulty

Moderate

Steps

6

Time Required

                          30 minutes - 1 hour

Sections

1

  • Speaker
  • 6 steps

Flags

0

  • BackHP Chromebook 14-x010wm

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Speaker
  • Begin by flipping the laptop over to its backside.
  • Remove all 13 Phillips #00 screws (5.7 mm in length).
  • You must remove four rubber feet to remove the top corner screws.

Begin by flipping the laptop over to its backside.

Remove all 13 Phillips #00 screws (5.7 mm in length).

You must remove four rubber feet to remove the top corner screws.

1024

Step 2

  • Turn the laptop over and open it to face you.
  • Insert a prying tool between the keyboard and bottom cover, and slide the prying tool in a counter-clockwise direction to separate the casing.

Turn the laptop over and open it to face you.

Insert a prying tool between the keyboard and bottom cover, and slide the prying tool in a counter-clockwise direction to separate the casing.

Step 3

  • Once detached, carefully lift the keyboard upwards.
  • Disconnect the two ribbon cables attached to the motherboard.

Once detached, carefully lift the keyboard upwards.

Disconnect the two ribbon cables attached to the motherboard.

Step 4

  • Lift the black ZIF tab and disconnect the daughterboard ribbon cable.
  • Use a nylon spudger or tweezers to disconnect the cable connecting the battery and the motherboard by sliding it out in the downward direction.
  • Disconnect the speaker cable from the motherboard.

Lift the black ZIF tab and disconnect the daughterboard ribbon cable.

Use a nylon spudger or tweezers to disconnect the cable connecting the battery and the motherboard by sliding it out in the downward direction.

Disconnect the speaker cable from the motherboard.

Step 5

  • Once all connections have been removed, begin unscrewing all nine screws from the battery.
  • Lift the battery carefully and put aside.

Once all connections have been removed, begin unscrewing all nine screws from the battery.

Lift the battery carefully and put aside.

Step 6

  • Lift the adhesive tape.
  • Once the tape has been lifted, both left and right speakers can be removed.

Lift the adhesive tape.

Once the tape has been lifted, both left and right speakers can be removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 3 other contributors 


                    Karine Veruete

Member since: 03/30/2022

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       IUPUI, Team 1-1, Harley Spring 2022                        

                                                  Member of IUPUI, Team 1-1, Harley Spring 2022 



                    IUPUI-HARLEY-S22S1G1                     


                                            4 Members                     


                                            3 Guides authored