Hp Chromebook 14 X010Wm Motherboard Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          30 minutes - 1 hour            

Sections

1

• Motherboard
• 6 steps

Flags

0

• BackHP Chromebook 14-x010wm

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

Be sure to take your time and not rush any steps.

What you need

Step 1

              Motherboard               

• Start with unscrewing all 16 5.7mm screws from the bottom of the laptop.
• Make sure to remove the rubber pads covering 4 of the screws near the back of the laptop.

Start with unscrewing all 16 5.7mm screws from the bottom of the laptop.

Make sure to remove the rubber pads covering 4 of the screws near the back of the laptop.

1024

Step 2

• Pop the clips around the perimeter of the keyboard tray.

Pop the clips around the perimeter of the keyboard tray.

Step 3

• Lift the keyboard tray carefully and disconnect the ribbon cables before setting it aside.

Lift the keyboard tray carefully and disconnect the ribbon cables before setting it aside.

Step 4

• The motherboard is located in the top left corner of the laptop.
• Be sure to disconnect the battery as well as any other connectors on the motherboard.
• We recommend a prying motion on the two power cords seen in the top right of the motherboard.

The motherboard is located in the top left corner of the laptop.

Be sure to disconnect the battery as well as any other connectors on the motherboard.

We recommend a prying motion on the two power cords seen in the top right of the motherboard.

Step 5

• Remove all the screws securing the motherboard down.

Remove all the screws securing the motherboard down.

Step 6

• Remove the copper heat sink and then remove the motherboard using a tilting motion for the ports to slip out of the plastic casing.

Remove the copper heat sink and then remove the motherboard using a tilting motion for the ports to slip out of the plastic casing.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Tyler                     

Member since: 03/30/2022

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges                           

Team

                       IUPUI, Team 1-1, Harley Spring 2022                        

                                                  Member of IUPUI, Team 1-1, Harley Spring 2022 



                    IUPUI-HARLEY-S22S1G1                     


                                            4 Members                     


                                            3 Guides authored