Difficulty

Moderate

Steps

11

Time Required

                          45 minutes

Sections

3

  • Keyboard
  • 4 steps
  • Battery
  • 3 steps
  • Motherboard
  • 4 steps

Flags

0

  • BackHP Chromebook 14-Q070NR

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • At this point, the white caps that hide the top-most screws marked with red circles have been removed.
  • Using the Phillips #1 screwdriver, remove the (10) ten screws from the bottom of the device.
  • After removing the white caps covering the screws, use the Phillips #1 screwdriver to remove the (3) three screws indicated with red circles.

At this point, the white caps that hide the top-most screws marked with red circles have been removed.

Using the Phillips #1 screwdriver, remove the (10) ten screws from the bottom of the device.

After removing the white caps covering the screws, use the Phillips #1 screwdriver to remove the (3) three screws indicated with red circles.

1024

Step 2

  • Open the laptop and place it upright. Remove the keyboard from the device using a plastic spudger or opening tool.
  • Carefully remove as there are ribbons attached to the keyboard that is connected to the components inside.
  • Gently lift the keyboard just enough to expose the ribbons.

Open the laptop and place it upright. Remove the keyboard from the device using a plastic spudger or opening tool.

Carefully remove as there are ribbons attached to the keyboard that is connected to the components inside.

Gently lift the keyboard just enough to expose the ribbons.

Step 3

  • Hold the keyboard up to remove the ribbons from the circuit board.
  • To remove each individual ribbon, grab the blue portion of each ribbon and pull it towards your direction until it is fully detached.

Hold the keyboard up to remove the ribbons from the circuit board.

To remove each individual ribbon, grab the blue portion of each ribbon and pull it towards your direction until it is fully detached.

Step 4

  • Once the ribbons are detached, remove the keyboard from the device.

Once the ribbons are detached, remove the keyboard from the device.

Step 5

              Battery
  • Using the Phillips #0 screwdriver, remove the (2) two screws at the bottom of the device.
  • Once removed, separate the screws from previous ones. They are different!

Using the Phillips #0 screwdriver, remove the (2) two screws at the bottom of the device.

Once removed, separate the screws from previous ones. They are different!

Step 6

  • Remove the taped flat wire from the top of the battery.
  • Carefully pull away the connector from the top of the battery to the motherboard.

Remove the taped flat wire from the top of the battery.

Carefully pull away the connector from the top of the battery to the motherboard.

Step 7

  • Carefully lift the battery and remove it from the device.

Carefully lift the battery and remove it from the device.

Step 8

              Motherboard
  • Carefully remove the (3) three plastic strips attached to the motherboard.

Carefully remove the (3) three plastic strips attached to the motherboard.

Step 9

  • Use the Phillips #1 screwdriver to remove the (5) five screws.

Use the Phillips #1 screwdriver to remove the (5) five screws.

Step 10

  • Use the blue plastic opening tool to disconnect the connectors. Remove the fan from the motherboard.

Use the blue plastic opening tool to disconnect the connectors. Remove the fan from the motherboard.

Step 11

  • Gently lift while using the plastic opening tool to unhinge the motherboard from the computer in an upward pattern.
  • Be very careful not to detach the motherboard to quickly or forcefully since you could damage or break it.

Gently lift while using the plastic opening tool to unhinge the motherboard from the computer in an upward pattern.

Be very careful not to detach the motherboard to quickly or forcefully since you could damage or break it.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 


                    Jose Hernandez

Member since: 10/02/2017

101 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       USF Tampa, Team S9-G5, Remmell Fall 2017                        

                                                  Member of USF Tampa, Team S9-G5, Remmell Fall 2017 



                    USFT-REMMELL-F17S9G5                     


                                            5 Members                     


                                            5 Guides authored