Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

  • Keyboard and Touchpad
  • 5 steps

Flags

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackHP Chromebook 14-Q010DX

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard and Touchpad               
  • The yellow circle represents the rubber covering that protects the screw. And the red circle represents the screws.
  • Flip the laptop such that the base of the laptop should face you. Remove the rubber covering with help of any sharp pointed object and then unscrew the screw.

The yellow circle represents the rubber covering that protects the screw. And the red circle represents the screws.

Flip the laptop such that the base of the laptop should face you. Remove the rubber covering with help of any sharp pointed object and then unscrew the screw.

1024

Step 2

  • Using a plastic opening tool or the spudger to separate the keyboard from the frame of the laptop.
  • Gently lower the keyboard towards you to expose the wires attached beneath.

Using a plastic opening tool or the spudger to separate the keyboard from the frame of the laptop.

Gently lower the keyboard towards you to expose the wires attached beneath.

Step 3

  • Lift the black flap in the left black rectangle and pull the blue ribbon gently towards you until it is disconnected.
  • Lift the white flap in the right black rectangle and pull the blue ribbon towards you until it is disconnected.

Lift the black flap in the left black rectangle and pull the blue ribbon gently towards you until it is disconnected.

Lift the white flap in the right black rectangle and pull the blue ribbon towards you until it is disconnected.

Step 4

  • Lift keyboard slightly and remove the strip gently so is not damaging any parts . The tape has no function other than to keep the wire tucked away.

Lift keyboard slightly and remove the strip gently so is not damaging any parts . The tape has no function other than to keep the wire tucked away.

Step 5

  • Keyboard is now detached from the laptop and can be placed to the side.

Keyboard is now detached from the laptop and can be placed to the side.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      16 other people completed this guide.                                             

Author

                                      with 7 other contributors 

                    Wilfredo Ramos                     

Member since: 01/28/2015

591 Reputation

                                      1 Guide authored                  



                       Badges:
                       19







                                                        +16 more badges                           

Team

                       USF Tampa, Team 17-2, Watkins Winter 2015                        

                                                  Member of USF Tampa, Team 17-2, Watkins Winter 2015 



                    USFT-WATKINS-W15S17G2                     


                                            4 Members                     


                                            8 Guides authored                     

Justin Cowen - Jan 12, 2016

Reply

In the black variant of this model I found that there are two screws under the rubber feet near the hinge.

Terry - Apr 17, 2016

Reply

Super easy repair, keep track of your screws and be very careful with ribbon that connects keyboard and Touch pad.

Josh Bollman - Jun 13, 2016

Reply

This was very close to a similar HP Chromebook I had to repair recently. Such a beautiful and simple process. I cleaned the keyboard connectors and everything functioned perfectly after I was done. The whole process took about 30 minutes (allotting 10 minutes to find my rubbing alcohol that my wife hid from me).

Pawel Wozniak - Aug 15, 2016

Reply

Any idea how to get the replacement keyboard?

Kevin Piper - Aug 24, 2016

At the top of this page under “Relevant parts” there is a link to purchase the keyboard replacement.