Difficulty

Moderate

Steps

7

Time Required

                          15 - 20 minutes

Sections

3

  • Keyboard
  • 3 steps
  • Battery
  • 3 steps
  • Heat Sink
  • 1 step

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackHP Chromebook 14-ak041dx

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Keyboard
  • You will need a pair of tweezers and a Phillips screwdriver.
  • Remove eight 5mm Phillips #0 screws from the back cover of the laptop.

You will need a pair of tweezers and a Phillips screwdriver.

Remove eight 5mm Phillips #0 screws from the back cover of the laptop.

1024

Step 2

  • Using a pair of tweezers, remove the five grey silicone covers.
  • Remove the five 5mm Phillips #0 screws beneath the grey silicone covers.
  • Place them aside where they will not be lost.

Using a pair of tweezers, remove the five grey silicone covers.

Remove the five 5mm Phillips #0 screws beneath the grey silicone covers.

Place them aside where they will not be lost.

Step 3

  • Carefully open your Chromebook case and gently pull the keyboard away from the back panel.
  • Place the keyboard aside. Inspect for any visual damage or marks.

Carefully open your Chromebook case and gently pull the keyboard away from the back panel.

Place the keyboard aside. Inspect for any visual damage or marks.

Step 4

              Battery
  • Remove the four 3mm Phillips #000 screws holding the battery in place.

Remove the four 3mm Phillips #000 screws holding the battery in place.

Step 5

  • Slide a spudger underneath the white strip over the battery to gently pull the strip away from the adhesive sticking to the battery.
  • Using a pair of tweezers, grip the black tape connected to the battery, and gently pull back to unplug the battery.

Slide a spudger underneath the white strip over the battery to gently pull the strip away from the adhesive sticking to the battery.

Using a pair of tweezers, grip the black tape connected to the battery, and gently pull back to unplug the battery.

Step 6

  • Carefully lift the battery out of the laptop.

Carefully lift the battery out of the laptop.

Step 7

              Heat Sink
  • Remove the two 1.5mm Phillips #000 from the copper heat sink on top of the motherboard.
  • Remove the heat sink from the laptop.

Remove the two 1.5mm Phillips #000 from the copper heat sink on top of the motherboard.

Remove the heat sink from the laptop.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Kristen Gismondi

Member since: 11/12/2014

69,395 Reputation

                                      176 Guides authored                  



                       Badges:
                       44







                                                        +41 more badges

Team

                       iFixit                        

                                                  Member of iFixit 



                    Community                     


                                            141 Members                     


                                            15,769 Guides authored