Difficulty
Easy
Steps
6
Time Required
10 - 15 minutes
Sections
1
- Charging Port
- 6 steps
Flags
0
BackHP Chromebook 14-ak013dx
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Charging Port
- Position the laptop so that the bottom is facing towards you and the fold facing away.
- Using a plastic opening tool or another prying device, remove the five rubber stoppers on the upper side of the laptop to reveal screws.
- Using a Phillips-head screwdriver or another capable tool, unscrew the thirteen 5.0 mm Phillips #1 screws on the base of the laptop.
Position the laptop so that the bottom is facing towards you and the fold facing away.
Using a plastic opening tool or another prying device, remove the five rubber stoppers on the upper side of the laptop to reveal screws.
Using a Phillips-head screwdriver or another capable tool, unscrew the thirteen 5.0 mm Phillips #1 screws on the base of the laptop.
1024
Step 2
- Flip the laptop over and open it so the keyboard is visible.
- Using a plastic opening or prying tool, insert the tool between the keyboard and bottom casing. Then rotate the tool away from the laptop to open it up.
- Be sure not to pull the keyboard away just yet as the ribbons are still connected.
Flip the laptop over and open it so the keyboard is visible.
Using a plastic opening or prying tool, insert the tool between the keyboard and bottom casing. Then rotate the tool away from the laptop to open it up.
Be sure not to pull the keyboard away just yet as the ribbons are still connected.
Step 3
- Using a plastic opening tool or your fingers, lift the two black flaps that hold the ribbons connecting the keyboard and touch-pad to fully disconnect the keyboard from the laptop.
Using a plastic opening tool or your fingers, lift the two black flaps that hold the ribbons connecting the keyboard and touch-pad to fully disconnect the keyboard from the laptop.
Step 4
- Disconnect the battery cable from the system board
Disconnect the battery cable from the system board
Step 5
- Partially remove the tape that is covering the two wires connecting to the wireless adaptor.
- Disconnect the white and black wires from the adaptor and remove it from the plastic piece used to guide the wire to free up space.
- The wires are labeled (1) and (2), make note of their position for reassembly
Partially remove the tape that is covering the two wires connecting to the wireless adaptor.
Disconnect the white and black wires from the adaptor and remove it from the plastic piece used to guide the wire to free up space.
The wires are labeled (1) and (2), make note of their position for reassembly
Step 6
- Using a prying tool or your fingers, remove the charging port head.
- Pull by the white plastic or by the wiring away from the connector to remove the piece completely.
- Replace the broken charging port with a new one.
Using a prying tool or your fingers, remove the charging port head.
Pull by the white plastic or by the wiring away from the connector to remove the piece completely.
Replace the broken charging port with a new one.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
5 other people completed this guide.
Author
with 4 other contributors
Igli Duro
Member since: 02/15/2017
200 Reputation
1 Guide authored
Badges:
7
+4 more badges
Team
USF Tampa, Team 10-2, Remmell Spring 2017
Member of USF Tampa, Team 10-2, Remmell Spring 2017
USFT-REMMELL-S17S10G2
4 Members
1 Guide authored
Neah McGovern - May 16, 2018
Reply
Where can you find a replacement charger port? My model is HP chromebook 11 g5ee
RACHEL LICATA - Sep 6, 2018
Reply
Worked! THANK YOU!
