Hp Chromebook 11A G8 Ee Bezel Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          10 - 20 minutes

Sections

HP Chromebook 11A G8 EE Disassembly
3 steps
Bezel
4 steps

Flags

BackHP Chromebook 11A G8 EE
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              HP Chromebook 11A G8 EE Disassembly

On the bottom of the laptop, remove four 7 mm screw using a Phillips #1 screwdriver.
Using the Phillips #1 screwdriver, remove two 8 mm screws just below the four you removed.

On the bottom of the laptop, remove four 7 mm screw using a Phillips #1 screwdriver.

Using the Phillips #1 screwdriver, remove two 8 mm screws just below the four you removed.

1024

Step 2

Flip the laptop over and open up the display.
Using the iFixit opening tool, carefully separate the palm rest from the bottom cover by working your way around the perimeter and prying it up.
You will hear an audible and tactile click or pop letting you know that you have unclipped a portion of the palm rest from the base enclosure.
Lift the palm rest of the laptops towards you, away from the screen.

Flip the laptop over and open up the display.

Using the iFixit opening tool, carefully separate the palm rest from the bottom cover by working your way around the perimeter and prying it up.

You will hear an audible and tactile click or pop letting you know that you have unclipped a portion of the palm rest from the base enclosure.

Lift the palm rest of the laptops towards you, away from the screen.

Step 3

Carefully, lift the keyboard ribbon lock and disconnect the keyboard ribbon from the motherboard.
Disconnect the touchpad ribbon from the motherboard, and remove top cover.
Remove the keyboard.

Carefully, lift the keyboard ribbon lock and disconnect the keyboard ribbon from the motherboard.

Disconnect the touchpad ribbon from the motherboard, and remove top cover.

Remove the keyboard.

Step 4

              Bezel

Pry the hinge cap off with your hands by lifting it up.

Pry the hinge cap off with your hands by lifting it up.

Step 5

Use the iFixit opening tool to pry the bezel up.

Use the iFixit opening tool to pry the bezel up.

Step 6

Once you have pried away the bezel, pull it up towards you.
Peel it off gently from the screen.

Once you have pried away the bezel, pull it up towards you.

Peel it off gently from the screen.

Step 7

You are finished once the bezel is off of the device.

You are finished once the bezel is off of the device.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Kim Travers

Member since: 09/03/2021

345 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       University of Alabama, Team 2-1, Bedsole Fall 2021                        

                                                  Member of University of Alabama, Team 2-1, Bedsole Fall 2021 



                    UA-BEDSOLE-F21S2G1                     


                                            4 Members                     


                                            7 Guides authored

Scott - Feb 24, 2022

Just curious why the back needs to be unscrewed and the keyboard removed to take off the bezel.

The spine piece can be removed with the device closed.

Also, the bezel is attached with a lot of adhesive. Be extremely careful to not break the bezel when removing it.

Introduction#

What you need#

Team#

Introduction

What you need

Team