Difficulty

Easy

Steps

7

Time Required

                          10 minutes

Sections

1

  • LCD Screen
  • 7 steps

Flags

0

  • BackHP Chromebook 11-2210nr

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD Screen
  • Remove adhesive tabs using fine point tweezers or a metal spudger.
  • These adhesives are typically located at the bottom left and right corners of the screen.

Remove adhesive tabs using fine point tweezers or a metal spudger.

These adhesives are typically located at the bottom left and right corners of the screen.

1024

Step 2

  • Remove the one 3 mm screw located underneath both adhesive layers using a Phillips #0 screwdriver.

Remove the one 3 mm screw located underneath both adhesive layers using a Phillips #0 screwdriver.

Step 3

  • Using a metal spudger, gently pry the front plastic frame (or bezel) off of the device by inserting the tool along the inside edge of the bezel.
  • Completely open the screen as far as possible to remove the bottom edge of the bezel from the laptop.
  • Be sure to disconnect the bezel from all the way around the screen before completely removing.

Using a metal spudger, gently pry the front plastic frame (or bezel) off of the device by inserting the tool along the inside edge of the bezel.

Completely open the screen as far as possible to remove the bottom edge of the bezel from the laptop.

Be sure to disconnect the bezel from all the way around the screen before completely removing.

Step 4

  • Remove the four black 3 mm screws along the left and right sides of the LCD screen using a Phillips #0 screwdriver.

Remove the four black 3 mm screws along the left and right sides of the LCD screen using a Phillips #0 screwdriver.

Step 5

  • After removing all screws, gently lower the LCD screen onto the keyboard.
  • The LCD screen will not be completely disconnected from the laptop just yet.

After removing all screws, gently lower the LCD screen onto the keyboard.

The LCD screen will not be completely disconnected from the laptop just yet.

Step 6

  • Gently use the spudger to pry off the tape on top of the gold chip. You may also use your hands to gently remove the tape.

Gently use the spudger to pry off the tape on top of the gold chip. You may also use your hands to gently remove the tape.

Step 7

  • Remove the display cable by gently sliding out the cable away from the LCD screen.
  • This action disconnects the LCD screen from the rest of the device, allowing it to be completely removed.

Remove the display cable by gently sliding out the cable away from the LCD screen.

This action disconnects the LCD screen from the rest of the device, allowing it to be completely removed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 4 other contributors 


                    Kimberly Rodriguez

Member since: 10/02/2018

425 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Sam Houston State, Team S11-G3, Blackburne Fall 2018                        

                                                  Member of Sam Houston State, Team S11-G3, Blackburne Fall 2018 



                    SHSU-BLACKBURNE-F18S11G3                     


                                            4 Members                     


                                            5 Guides authored