Hp 8 1401 Power Volume Button Board Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

2

• Back Panel
• 3 steps
• Power/ Volume Button Board
• 2 steps

Flags

0

• BackHP 8 1401

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Back Panel               

• Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

Using a Torx T4 screwdriver, remove the four 5 mm screws on the back panel.

1024

Step 2

• Insert the tip of a plastic opening tool in the seam between the front and back panels.

Insert the tip of a plastic opening tool in the seam between the front and back panels.

Step 3

• Slide the plastic opening tool around all edges of the device until the back panel detaches.
• Lift off the back panel.

Slide the plastic opening tool around all edges of the device until the back panel detaches.

Lift off the back panel.

Step 4

              Power/ Volume Button Board               

• Disconnect the power/ volume button board from the control board by pulling the ribbon cable out of the white connector. You can use tweezers or your fingers.

Disconnect the power/ volume button board from the control board by pulling the ribbon cable out of the white connector. You can use tweezers or your fingers.

Step 5

• After removing the power/ volume button board, it should look like this.

After removing the power/ volume button board, it should look like this.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Katie Presz                     

Member since: 01/16/2019

641 Reputation

                                      6 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges                           

Team

                       University of Alabama, Team S1-G1, Bedsole Spring 2019                        

                                                  Member of University of Alabama, Team S1-G1, Bedsole Spring 2019 



                    UA-BEDSOLE-S19S1G1                     


                                            4 Members                     


                                            6 Guides authored